RC10Talk - The Net's Largest Vintage R/C Community

someone posted a link to a bearing supplier for the front wheels. They were cheap as heck.. $1 each.. Was it hoopty?? Can ya repost it? I can't find the thread:( Thanks

I highly recommend Avid R/C for all of your bearing needs. Fantastic race quality bearings and excellent service.

Now they do not have stock for the front and rear bearings for RC10...been waiting for the past two weeks to order mine. Now I'm stuck with my resto!

that it. thanks . Now what size are the fronts????

ebay seller walawala sell bearings for the rc10.

FlyinGN wrote:that it. thanks . Now what size are the fronts????

Its 4pcs of 3/16 X 5/16 Flanged.

isn't it 3/16" x 3/8th??? I hope so cause I just bought a bunch:)

http://www.avidrc.com/?action=item&id=88&prevaction=search&previd=&prevstart=0

did a serach and come up with nothing on ebay from walawala

shodog wrote:ebay seller walawala sell bearings for the rc10.

it all depends on what rim your gonna use, as to what size bearing you need.

Brat wrote:

FlyinGN wrote:that it. thanks . Now what size are the fronts????

Its 4pcs of 3/16 X 5/16 Flanged.

What I've mentioned are for the 3pieces original wheels....sorry

Wow, never knew about Avid. I've used Boca Bearing in the past. They have a 99 cent bearing store plus free shipping if you spend over 12 bucks (I think).

http://www.bocabearings.com/main1.aspx?p=ws

FlyinGN wrote:did a serach and come up with nothing on ebay from walawala

Here is a link http://search.stores.ebay.com/WalawalaStore_3-16x5-16_W0QQfcdZ2QQfciZ0QQfclZ3QQfromZR10QQfsnZWalawalaStoreQQfsooZ2QQfsopZ2QQftsZ2QQsaselZ69548135QQsatitleZ3Q2f16x5Q2f16QQsofpZ0

thanks sho

FlyinGN wrote:isn't it 3/16" x 3/8th??? I hope so cause I just bought a bunch:)

http://www.avidrc.com/?action=item&id=88&prevaction=search&previd=&prevstart=0

just as a heads up, the bearings in that link aren't for front wheels at all. those are the ones to use if your gonna convert your rear axles to 3/16", using a standard rc10 buggy hub carrier. if your gonna use the org. 3 piece, 1 piece tq, or pretty much any other older rim for an rc10, you need 3/16" x 5/16" flanged bearings. if your gonna use 3 piece c.e./worlds, b2/b3, losi, or any truck wheel, you need 3/8" x 3/16" plain bearings.