Page 1 of 1

T2/GT servo saver on a rc10?

Posted: Thu Apr 29, 2010 2:29 pm
by cmain
has anyone tried a T2/GT servo saver on a rc10? Just wondering if it will work before I try it.

thanks
mark

Re: T2/GT servo saver on a rc10?

Posted: Thu Apr 29, 2010 3:02 pm
by Group B
I know that Lowrydesign has used those parts in an rc10 before, I just can't remember why...

Re: T2/GT servo saver on a rc10?

Posted: Thu Apr 29, 2010 3:20 pm
by metallicats33
If your talking about these: http://67.199.85.166/main/productdetails.php?text=7531&category=3015.10gtx

They work perfect :wink:
I actually bought a complete set and the instructions said "New steering for all RC10 Models except B2" or something along that lines...

You just need these too: http://67.199.85.166/main/productdetails.php?text=7306
But it looks like they will be extinct in a few weeks :cry:

Re: T2/GT servo saver on a rc10?

Posted: Thu Apr 29, 2010 5:23 pm
by SteveK
http://67.199.85.166/main/productdetails.php?text=9155&category=3010.10b2x
These have the same geometry as the DS/GT bellcranks, except the servo is mounted in-line. They fit the standard steering screws, but the right one might need some reaming of the bushings, so they pivot freely.

Re: T2/GT servo saver on a rc10?

Posted: Thu Apr 29, 2010 6:44 pm
by metallicats33
[quote="SteveK"] http://67.199.85.166/main/productdetails.php?text=9155&category=3010.10b2x
These have the same geometry as the DS/GT bellcranks, except the servo is mounted in-line.

Or you can use those and the servo rod mount from the GT steering and you wont have to change the servo mounting :wink:

Re: T2/GT servo saver on a rc10?

Posted: Thu Apr 29, 2010 7:45 pm
by cmain
Thanks :D That is great news I can now ditch the kimbrough servo saver and be able to adjust the tension of the spring.