RC10Talk - The Net's Largest Vintage R/C Community

New guy here, loving the losi's for along time, own quite a few, always in mid-restoration of some sort. In the middle of a JRx Pro version new parts restoration. i am having a bit of dificulty finding info on such buggy , so a friend lead me here. Just thought I would introduce myself instead of just lurking in the shadows

Welcome, lets see some pics!

Welcome Bud

Welcome to JRXProtalk.com --sorry

Welcome to the board! Would be great to see some pictures of your vintage Losis

Welcome to the addiction that is RC10talk! There is SOOO MUCH info on here, and the lads are always willing and able to fill in any holes in your knowledge of vintage R/C, plus there is some VERY creative people as well, you only have to check out some of the resto work these guys have done- absolute gold!

Enjoy!!!


Conrad

LOL thats what i said too. " you say I should go to what ? site to research Losi stuff??"
Thanks everyone. a wealth of info on this site.

Charlie don't surf wrote:Welcome to JRXProtalk.com --sorry

I am a Losi guy from back in the day - JRX2/JRXPro but started hangin around this site and 2 RC10's followed me home one day! It was okay cause there was a mint Losi XXX attached! This is a great site with lots of knowledge on all flavours.

Pro almost done. waiting final disassembly and clean with all proper bolts, body n paint. not sure which shock bodys to keep which one is proper?? silver or black??I understand their are probleysome things out of place feel free to pick away at it. Rims are beautiful!!

it doesnt look to bad the silver shocks are correct.

Yup... silver shocks - but for the Pro they should have the wider shock collers (the clamp) like those fitted on the front shocks. The thin type as used on the JRX2 would split if over-tightened.... incidentally I'm looking for a couple of these for my X2 build. Also do you have the RPM arms fitted on the back? My Pro has these wishbones & the shocks are angled back like they do on your car?

Car looks super fresh by the way... show us pics when its fully finished & you get the shell sprayed.

Thanks, I have another pair of silver shocks with proper collars I will install. I thought I read somewhere that the black shock bodys are aftermarket? any truth to that ??

slapshot1979 wrote:Thanks, I have another pair of silver shocks with proper collars I will install. I thought I read somewhere that the black shock bodys are aftermarket? any truth to that ??

I dont know about that, but almost all losi shocks from the pro se foward were black. those look like se or XX?

slapshot1979 wrote:Thanks, I have another pair of silver shocks with proper collars I will install. I thought I read somewhere that the black shock bodys are aftermarket? any truth to that ??

There are aftermarket black shock bodies made by mip. The tops of the bodies are different, and the anodizing is a very deep black. I don't have any comparison pics of them presently.

hello slapshot...welcome!!!

It looks like you have a very good example of a jrx pro and it should clean up nicely. As everyone stated, the silver shocks belong on the front...but it looks like you may have the wrong length on the rears. The silver shocks came in 3 lengths:

short - used on the front of the jrx2
medium - used on the rear of the jrx2, front of the jrx pro, and front and rear of the jrxt.
long - used on the rear of the jrx pro

You may want to check the lengths of all 4 shocks to make sure that you have the correct size fitted on the car.

In addition, your car has the bumper from the jrx2 (losi aftermarket...never included in any kit)...which mounts above the chassis. The pro has the version that mount below the chassis. Lastly, the pro has the red antena mount.

You have the chassis with the fiberglass in the middle. I beleive this was included in the early versions of the car. I had one that came with a jrxt kit that I purchased new. The jrx proformance kit (which came later) came with a solid black chassis.

Good luck on the restoration.

Regards,
highwayracer