Page 1 of 1
Dynatech arms
Posted: Wed Nov 03, 2010 6:10 pm
by Caine
Sorry if the info is already on the site as i couldnt find the info i was after. Are these arms a direct replacement for the wide track arms or do they need b4 hardware to work.
Thanks
Re: Dynatech arms
Posted: Wed Nov 03, 2010 6:22 pm
by Toasted Coastie
for the rear I used B4 universals. For the front I used an RC10T bulkhead and nose plate.
Re: Dynatech arms
Posted: Wed Nov 10, 2010 4:53 pm
by Caine
Hmm this sounds like it could be the start of my associated frankenstein. Time to start sourcing some parts!
Re: Dynatech arms
Posted: Wed Nov 10, 2010 8:10 pm
by soniccj5
The following threads should help you compile a list of parts for your build.
http://www.rc10talk.com/viewtopic.php?f=38&t=10403
http://www.rc10talk.com/viewtopic.php?f=35&t=5483&hilit=Dynotech
Happy reading.
Word of caution, once you start you won't be able to stop.
ED
Re: Dynatech arms
Posted: Thu Nov 11, 2010 2:28 am
by Caine
Thanks for the links, and yes you are right when i joined this forum i had a goldpan and a T2, now i have 2 10T's and 2 team cars as well and at the moment only one of them is running! At least i'll be occupied over the winter!