Page 1 of 1
Rear toe in
Posted: Thu Nov 11, 2010 9:31 pm
by DonDDR
Why does the RC10 have so much rear toe in?
Re: Rear toe in
Posted: Thu Nov 11, 2010 9:35 pm
by Charlie don't surf
It can have anywhere from 0 deg, 1.5 and 3 deg, then from 0 deg, to 1.5 at the hubs-
Why? to maintain rear traction in loose conditions
Re: Rear toe in
Posted: Thu Nov 11, 2010 10:10 pm
by DonDDR
My stock 10T seems to have alot and I dont see any way to adjust it with out replacing the arms.
Re: Rear toe in
Posted: Fri Nov 12, 2010 7:38 am
by scr8p
the arms don't have anything to do with the toe. it's the arm mounts and hub carrier.
i kinda think the 10t came with 1.5 arm mounts and 3 degree hubs. 4.5 total. 0 degreee rear hubs are still available. get a pair of them and you'll be down to 1.5 total.
the 0 degree and 3 degree arm mounts are marked right on top. if yours aren't, they are 1.5's.