RC10Talk - The Net's Largest Vintage R/C Community

I'm looking to replace the white wishbones on my 10T with the RPM ones, problem is i cant find anywhere in the u.k that stocks the fronts, rears, and rear hub carriers. I can only find rears.
I've checked tower and liquid rc but cant find the whole lot. It says on the RPM website that the parts are available but i cant find where from.
Do any of you guys know anywhere in the states that might have them that would ship to the uk?
I will add even thou RPM said they will not ship overseas i have e-mailed and asked, but no reply as yet
Cheers guys

RPM should ship overseas- but I'm sure any number of guys here will help you out if not-

i know there are alot of them on ebay right now. black and blue, no white though.

i got mine off ebay.

Tower Hobbies has them both, and they ship internationally. You have to search by the RPM part number; using just 'RC10T' or 'RC10GT' didn't work.

Ah right, i didnt shop by part number just rc10t or gt like you said. Will have alook now
Thanks

Caine wrote:Ah right, i didnt shop by part number just rc10t or gt like you said. Will have alook now
Thanks

Were you able to get the RPM parts? if so can you please PM me where?

You have pm Sir

Does anyone have the RC10T RPM white arm part numbers?

Thanks!

same as the black and blue ones. just leave off the last number.

I was looking for these recently with no luck
I whant them for my 10t stadium truck
Do arms for any other model fit 10gt or anything else
Thanks mike

It looks like the last digit is for the color of the plastic. See below:

1= white
2 = black
5 = blue
7 = yellow
8 = purple

For example: RPM #70808 is for purple 4-40 nuts. If you change the number to #70807 it's for yellow 4-40 nuts.

RPM makes same parts in white, but not for the vintage RC10

68sportcoup wrote:Do arms for any other model fit 10gt or anything else
Thanks mike

Just the RC10gt, RC10t, RC10t2 share front and rear arms.

Todd

i found these on the rpm site.
all i had to do was look a little harder than before.

these where #70305.



and these where 70302.



but what are these i found on ebay ad said rc10gt2.
but they look different that the others i think the first ones look rite are these packaged wrong.

nope, they are packaged correctly. The rc10gt and rc10gt2 are two completely different animals. The gt2 stuff will not fit with the rc10t, rc10gt, or rc10t2. not much at all from the gt2 is compatible with anything before it unless you are talking shocks, turnbuckles/ball cups, wheels.

Todd

thanks for the heads up i must have read it to fast and thought it said gt2.
thanks
mike