RC10Talk - The Net's Largest Vintage R/C Community

im restoring my rc10 gold pan with rpm arms and was wondering what wheels fit the car? i want to put mip cvds on it can i use stock carriers with those? Also with the rpm arms being longer what size turn buckles do i use? finally what size shocks do i get for it? id like to add it has carbon fiber shock towers wich have more holes to choose then the stock fiberglass ones.

Thanks for any help, Derek

no u do not need to change anything for the mip cvds i used a set in my runner that im working on. and as for the wheels u can use any of the rc10 wheels and there are a lot of others too. sorry i cant help much im away from my cars at the moment... but i know the other guys here can answer your questions better than i can...

thanks for your help, i have alot of stock rc10 wheels but i need 2.2 wheels so i can buy some nice tires but people say they dont fit idk y.

if you go into the Temples RC10 Tech section, there is a stick "old is new" type builds, where guys (like me) have updated their 10's to use modern wheels/tires and be competitive on a track today.

You could do what I did and use b4 carriers, b44 cva's, and b4 wheels on the rear. You'll just need new bearings to fit the carriers.

Or you could get a set of wheels that are 2.2 and not change anything else. I have bought a few of these:

http://cgi.ebay.com/ws/eBayISAPI.dll?ViewItem&item=180575149748