RC10Talk - The Net's Largest Vintage R/C Community

I've been collecting parts for a while, there was a lot of interesting stuff out there from a lot of companies back in the early 90's
here is most of my collection of MIP Parts for the early losi cars.
Most notably missing is the yellow LB-2000 gearbox and a full CVD set.
I'm wondering what else they might have mader, besides replacement parts for the hop-ups

Anthony, are the out of package bodies MIP? They look different at the top?

I actually had to double check myself when taking the pictures.
I have a car I built up with a NIP set of x-long rear and long front bodies. The used, loose bodies pictured are the xl/1.2" length and exactly the same as the ones on my car.
the long and short ones have more of a taper around the crown area and match each other better.

aconsola wrote:I actually had to double check myself when taking the pictures.
I have a car I built up with a NIP set of x-long rear and long front bodies. The used, loose bodies pictured are the xl/1.2" length and exactly the same as the ones on my car.
the long and short ones have more of a taper around the crown area and match each other better.

you can see the difference between the 2 shock tops on this car. Both pairs came out of the same package, also pictured(because I save all the instruction sheets and header cards together for each build).

anthony can you show us how the slipper set-up goes together??

That's a stealthy looking JRX-Pro that I have not seen here before- you holding out on us Anthony?

Charlie don't surf wrote:That's a stealthy looking JRX-Pro that I have not seen here before- you holding out on us Anthony?

I was going for the all black theme, but like many projects never got around to painting it.
The body is perhaps one of the ugliest aftermarket uggy bodies so you're not missing much

GJW wrote:anthony can you show us how the slipper set-up goes together??

yup, here you go.

What kind of body is that on the Pro?

I saw how angular the side-pods were and for a moment thought that it was a Jammin Jumper body, but then I saw how far forward they extend ... which is too bad because I have been dying to know if the Jammin body will fit on a JRX2, Pro, or ProSE.

thanks ant!! much apreciated

aconsola wrote: The body is perhaps one of the ugliest aftermarket uggy bodies so you're not missing much

I kinda like it. Is it from McAllister?

yes. the roadrunner maybe?
Very angular.

aconsola wrote:I've been collecting parts for a while, there was a lot of interesting stuff out there from a lot of companies back in the early 90's
here is most of my collection of MIP Parts for the early losi cars.
Most notably missing is the yellow LB-2000 gearbox and a full CVD set.
I'm wondering what else they might have mader, besides replacement parts for the hop-ups

One more to add.