Page 1 of 1
B2/B3 front end
Posted: Tue Jun 14, 2011 11:48 pm
by fredswain
I was searching through the forum to see if it was possible to retrofit a B2/B3 front end on an original RC10 but came up short. I found the buggy build that has the original front end on a T2 chassis but I haven't found the reverse. Someone must have done it or at least know the answer. So, can it be done and if so, how well does it work?
Re: B2/B3 front end
Posted: Wed Jun 15, 2011 12:06 am
by scr8p
haven't seen anyone do it. i don't forsee it working out all that great.
Re: B2/B3 front end
Posted: Wed Jun 15, 2011 12:35 am
by cautrell05
From the pictures I have seen the nose plate mounting pattern looks similar to the originals. Im sure they are different but it would be nice to see them side by side to know for sure.
Example-
http://cgi.ebay.com/Associated-B3-Front-Kickup-RC10b2-/200619317981?pt=Radio_Control_Parts_Accessories&hash=item2eb5d7dadd
Nick
Re: B2/B3 front end
Posted: Wed Jun 15, 2011 8:35 am
by scr8p
ya, it looks similar, but they're not the same.
Re: B2/B3 front end
Posted: Wed Jun 15, 2011 9:02 am
by jwscab
it can be done if you use all B2/B3 parts except for the nose plate, and make your own noseplate to match up with the gold pan mounting pattern. you will have to get creative with the upper brace mounting to the chassis.
here is a scratch build I did, you can see the B2 front end parts and how they fit together.
http://www.rc10talk.com/viewtopic.php?f=40&t=16813