My JRX-Pro with a close recreation of my old race body
Posted: Thu Sep 29, 2011 11:50 pm
Well thanks to Rick for the body and front tires, I was able to complete (well except for the tires getting cleaned up) my JRX-Pro. I'm most happy that I was able to pretty closely mimic the paint job I had on my original JRX2 back in the late 80's. I bought the JRX2 from a hobby shop owner who had it sent as a show car and it came in pre-painted.
The only thing it's missing is the big number 5 on the front and passenger window but thanks to AMB, we don't need to do that anymore LOL. The lines weren't great on the paint job, but I started with older masking tape and that didn't seal right. I switched over to 3M blue, but not before a little damage was done. Dot 4 brake fluid did a pretty good job though.



For running gear. I have a vintage (but great condition) Tekin esc, a 13x2 motor, 2S Lipo (with alarm) and a vintage airtronics servo I had laying around


I'm really happy with her. I feel some of my teenage years creeping back in when I look at her LOL.
The only thing it's missing is the big number 5 on the front and passenger window but thanks to AMB, we don't need to do that anymore LOL. The lines weren't great on the paint job, but I started with older masking tape and that didn't seal right. I switched over to 3M blue, but not before a little damage was done. Dot 4 brake fluid did a pretty good job though.



For running gear. I have a vintage (but great condition) Tekin esc, a 13x2 motor, 2S Lipo (with alarm) and a vintage airtronics servo I had laying around


I'm really happy with her. I feel some of my teenage years creeping back in when I look at her LOL.