RC10Talk - The Net's Largest Vintage R/C Community

Hi,

Had this in a loose bag in storage and not sure exactly what it is. I believe it's a hydra drive but not sure.

Yep, Hydra and slipper to the XX/XXT.

Thanks....

Might do a search and see if I can find a parts list to make sure it's all there. I was told by the previous owner of my losi that it was for the the losi jrx and just needed to be installed.

The gear cover is from a XX. Looks like all the pieces are there but I'm going off of memory and havent had the car in about 8 years lol.

From the picture and my memory, you are missing the o-rings and the nylon screws that keep it all together.
See the instructions for better reference.
http://vintagelosi.com/Manuals_files/HydraDrive_A3100.pdf

Oh, and the gear cover is not XX, it is the JRX style gear cover for Hydra drive, a3004.

THis looks like it was an incomplete hydra slipper conversion kit for Jrx era buggies and trucks.

actually the 8 screws are there... they're just not nylon

one of the o-rings is there, with a square section on the top of the pic. the other (the large one) it's hard to see but it could actually be still inserted in one of the halves




Make sure you clean up that slipper pad really well

Hydra's rock!!!



Paul

Oh sheesh, yeah, I am a dummy. Definitely metal screws are used. 2 nylon ones are used on the filler holes.
You would think someone with a site like me would just look at the pictures he has.
http://vintagelosi.com/3000_Parts.html#54

Right you are; I saw the swoop near the pinion and thought XX.