Page 1 of 1
cvd's and top shaft for rc10
Posted: Fri Jan 13, 2012 2:38 pm
by mdwaeracer
Will the b44 cvd's work in the rc10? What is needed, well other than a b4 top shaft in origanal stealth tranny?
Thx
Re: cvd's and top shaft for rc10
Posted: Fri Jan 13, 2012 4:26 pm
by 8rad
The b44 CVD's will not work without longer arms and new hub carriers. The B4 top shaft is only needed to mount the B4 slipper assembly.
For most applications the stock stealth slipper is fine.
Re: cvd's and top shaft for rc10
Posted: Fri Jan 13, 2012 4:43 pm
by mdwaeracer
What arms are needed?
Re: cvd's and top shaft for rc10
Posted: Fri Jan 13, 2012 7:14 pm
by 8rad
Re: cvd's and top shaft for rc10
Posted: Fri Jan 13, 2012 11:21 pm
by JK Racing
b44 rear cvd's will work with stock rear arms, but you must use b4 rear hubs. on the b4 hubs, you must drill out the hinge pin hole to 1/8"
to use the b4 top shaft, you just need all the b4 slipper parts and drop it right into the stealth gearbox, no issues.