Page 1 of 1
Tc3 shock for a rc10l ?
Posted: Sun Jan 15, 2012 11:32 am
by shane
Will the Assoc. TC3 shock work on a RC10l? They look to be the same size (shaft and shock body), but was wondering if anyone here has done this or knows if it would work, before I spend money
Sorry if this has been asked before. Thanks for any help!
Re: Tc3 shock for a rc10l ?
Posted: Sun Jan 15, 2012 12:48 pm
by Jay Dub
They should be the same size. THere are however many shocks available that would work in that situation. -Jeff
Re: Tc3 shock for a rc10l ?
Posted: Sun Jan 15, 2012 12:49 pm
by shane
Thank you
Re: Tc3 shock for a rc10l ?
Posted: Sun Jan 15, 2012 12:50 pm
by Charlie don't surf
I think that the TC shock shafts were shorter, but like Jeff said- should work fine with.the correct length ball cups on it.
Re: Tc3 shock for a rc10l ?
Posted: Sun Jan 15, 2012 7:37 pm
by scr8p
you'll have to change to .35 shaft to a .56.
Re: Tc3 shock for a rc10l ?
Posted: Tue Jan 17, 2012 12:31 pm
by teman
Yes it works, I have one. I believe the spring is just the normal 10L, but I can take another look and compare it to a silver short buggy spring. Not sure about the shaft, I assume the person kept the stock shaft.
http://www.rc10talk.com/download/file.php?id=52096&mode=view
On my other 10L I recently swapped in a .71 for the stock shock and just reused the stock shaft instead of the .71 shaft (sorry no photo of that at the moment).
-kevin
Re: Tc3 shock for a rc10l ?
Posted: Tue Jan 17, 2012 12:50 pm
by shane
Thank you, all. I will use the TC3 shock.