Page 1 of 1
Where to buy set screws
Posted: Sun Mar 25, 2012 1:53 pm
by 85Edinger
Just set screws in general, for the RC10 buggy, like the ones holding in the shock pins, or the ones on the linkage collars. I know it's a noob question, I just have no idea where to look.
Re: Where to buy set screws
Posted: Sun Mar 25, 2012 2:06 pm
by scr8p
Re: Where to buy set screws
Posted: Sun Mar 25, 2012 3:26 pm
by THEYTOOKMYTHUMB
The big box stores like Lowe's or Home Depot have them if you're in a big market with big stores. They're in the big sliding drawers.
Re: Where to buy set screws
Posted: Sun Mar 25, 2012 3:37 pm
by 85Edinger
My Lowe's and Home Depot never have anything this small. What length are the shock pin set screws? My ruler says about 1/4", but I'm not sure how accurate it is. It's 4-40 pitch, right?
Re: Where to buy set screws
Posted: Mon Mar 26, 2012 6:16 am
by littleVETTE
they're threaded 4-40, and the length is 5/16.
if you're in need of more nuts, bolts, seals, or whatever you should put in an order at mcmaster.com. and you'll be set.
http://www.mcmaster.com/#set-screws/=gttzx3
Re: Where to buy set screws
Posted: Mon Mar 26, 2012 1:09 pm
by JPAE07
I purchased the set screws for the out drives on my MIP SP1 from Home Depot.
And a nice stainless allen screw/alum washer which attaches the spur gear to the topshaft there too.
Also found the C clips for the older bottom load associated shocks.
Re: Where to buy set screws
Posted: Mon Mar 26, 2012 1:13 pm
by jon burrows
Grainger
Re: Where to buy set screws
Posted: Fri Apr 06, 2012 5:17 pm
by 85Edinger
What size are the screws in the six-gear's idler? I don't have any wrenches that small.
Re: Where to buy set screws
Posted: Fri Apr 06, 2012 6:20 pm
by scr8p
.035