RC10Talk - The Net's Largest Vintage R/C Community

Is it a NOVAK vintage ESC switch ?

How long has Novak made escs? It would have to be really old. Older than anything I know of. I've personally never seen it on any of theirs, but I'm about as far from an expert as you can get.

It it possible, the earlier Novaks did use a similar switch, but it had a shrink tubing type cover- I'm digging through some old pics trying to have an example.

Looks like it, though mine have red and black wires.

scr8p wrote:Looks like it, though mine have red and black wires.

How old is it? Just curious.

That was the original style switch. So 84-85. I don't know when they went the the second style with the gray switch.

The wires come in the back though don't they? Not arguing, just bored at work.
http://www.teamnovak.com/timeline/large_timeline_jpgs/nesc1_1.jpg

One of these days I'll be right and you'll ALL be sorry!!


Thanks for the photo.

THEYTOOKMYTHUMB wrote:One of these days I'll be right and you'll ALL be sorry!!


Thanks for the photo.

lol

Come to think of it, the early tekins had the same switch. I'll post a pic when I get home.

yeah, I was gonna say it looked like a Tekin switch too. Then Novak moved to the one with the little gray button with heat shrink over the body, and tekin moved to the one with the black or red back plastic cover.

Yep, my old Tekin Mofet has that switch- http://www.rc10talk.com/viewtopic.php?f=27&t=22319&hilit=Jrx+pro on the Pro-

not the best pic, but i don't have the esc anymore to take a better one.

yes it's correct for old novak