RC10Talk - The Net's Largest Vintage R/C Community

Hi im building my RC10 grapihte chassis which is almost done.
What body shell is suitable for graphite chassis and where can i get/buy?
photo and link will be apreciated

Thanks

The protech II body and four inch wing is what came with the kit.

Just to clarify further on what rctenracer said, the Protech II unless you have a 6036 graphite team car- then its a Viper.

Thanks for the information
when i google, this is the only info i got

http://www.rc10talk.com/viewtopic.php?f=38&t=9301

any informations where i can get this?

Charlie don't surf wrote:Just to clarify further on what rctenracer said, the Protech II unless you have a 6036 graphite team car- then its a Viper.

i will upload photos, as i do not know what i have.
my knowledge in RC10 is very limited

Charlie don't surf wrote:Just to clarify further on what rctenracer said, the Protech II unless you have a 6036 graphite team car- then its a Viper.

Thanks for the info I didn't know that. So the six gear graphite 6025 and 6030 came with the ProII and the team 6036 (stealth trans) has the viper?

Yep. And.......6 gear and early stealth C.E.'s too

here is the photos of my RC10, I believe the chassis is design for six gears, but ive asked my friends help to add holes to accomodate the steatlh.
which one is right shell for this, viper or protect II?
thanks

The viper looks better in my opinion so that's the one I bought for my Graphite Stealth.