RC10Talk - The Net's Largest Vintage R/C Community

I'm building a runner RC10T out of a bunch of used parts I had laying around. I want to get a set of CVD's for it but I want to make sure I buy the right set. I'm using the stealth tranny with regular outdrives, regular rear arm mounts, RPM rear arms and RPM 10T hub carriers with 1/4 x 1/2 x 3/16 bearings. I would like to use GT wheels with this set up as well. Which CVD's will work for me?

http://www3.towerhobbies.com/cgi-bin/wti0001p?&I=LXAW07&P
http://www3.towerhobbies.com/cgi-bin/wti0001p?&P=9&I=LX3277
These will work for 3/16 rims

And for 1/4"

http://miponline.com/cgi-bin/sc/productsearch.cgi?storeid=*16fc367e918b600906aea51ffa&search_field=rc10t

or

http://www.ebay.com/itm/MIP-Shiny-CVD-kit-RC10-GT-T-w-1-4-Axles-/230838558512?pt=Radio_Control_Parts_Accessories&hash=item35bf0cdf30#ht_2726wt_1180

Quik

So 1/4" wheels would be the wheels for the RC10GT right? Like these:

http://www3.towerhobbies.com/cgi-bin/wti0001p?&I=LX2956&P=7

If I use these wheels, will the 1/4 x 1/2 x 3/16 bearings work with the cvd's or do I need a different bearing?

unclemikey1978 wrote:So 1/4" wheels would be the wheels for the RC10GT right? Like these:

http://www3.towerhobbies.com/cgi-bin/wti0001p?&I=LX2956&P=7

If I use these wheels, will the 1/4 x 1/2 x 3/16 bearings work with the cvd's or do I need a different bearing?

Sounds like you need the 1/2 (od) x 1/4 (id) like those in the 70232 RPM part. Just use two dimensions to describe the bearings. the 3rd (thickness) is what it is in r/c.

1/2 the way down this page should outline it for you with pictures..

http://www.rpmrcproducts.com/products/assoc/rear.htm

Ok thanks a lot for everyones help, I think I know what I need to make this work.