RC10Talk - The Net's Largest Vintage R/C Community

i love my bulk buys
250 $ for it all
2 boxes of goodies




unpacking the boxes
lots of good trucks/buggies


the whole reason i bought the lot

a rc10t with a crazy cool paint job it has a signature that says g> baker paints





and according to the body a b3




also in the box
3 mlst2





2 losi cars a jrx2 with an intresting trailing arm mod and the other im not shure what it is



a crappy evader




and various esc tx and rx allong with a couple of bodies


ps anyone know what the heck this super narrow body went to

Nice score on the Lot! The MLST2 are cool. I have been looking for one of these for myself. The bodies are painted up pretty decent as well.

looks like the mlst have a problem with the servos that were used

the used 2 micro servos

2 of the 3 had none installed
1 had servos but they run like motors (non stop spining and they dont move the wheels)


got 2 ready 2 run excpt the servos
3rd has bad esc and missing slipper and spur gear on center dif
and missing one of the front carriers and axle



on a up side i removed the body from the rc10 t and found a surprise lol

Which one, the rpm trans or the trans spacer under the body post? Both are cool, white is getting hard to find

i was talkng about the rpm trans
didnt even notice the spacer lol

the shiny white rpm tranny was keeping my add at bay lol

i have been hunting ebay for one for a loooong time but they always went to high for my taste

now i have one

im going to have to swap my white rpm arms from my other 10t to it

(good thing i started tearing domwn my old 10 to rebuild it yesterday lol)

Nice catch there, anyway, from experience, RPM trans tends to chew the idler gear more often when paired off a BL motor, dont know why. maybe the top gear teeths (lesser count) are a bit smaller than the stock stealth top shaft. that just for me though, so i resorted back to the good o'l stealth.

The white rpm hydra drive gear cover
Is pretty darn sweet
And TC! TB's
Farmer

hmm have yet to pull off the cover wonder if it has the hydra drive conversion

The cool painted RC10T Body reminds me of Rocko's Modern Life for some reason.

good buy. if you ever want to make a good chunk of money back sell the rpm cover by itself.

Sent scr8p a b/s/t request on fee pay like a week ago still waiting to get approved

I have a ton of spare parts I'd like to offer here before I list on feepay

and the 10T has the heavy duty tecnas

Plastic Losi truck is junior T

the other one looks like actually some kind of JrxPro with truck wheels and extra rear links (which, btw, can't work without binding the suspension...)

Nice lot

PAul

oh yea def a good bulk buy lookie what was behind the gear cover


mmmmm sexy
i loved the hydra drive on my xx cr

are they any good on the rc10t




now if i can get some cheap servos for the crappy mlst'2 ill be doing good

hydra is good on anything but not when not mounted properly like on this poor thing (look at the thrust bearing...)

Paul

yea i noticed the bearing was in the wrong spot lol (dont know how they thought that was the way it went lol )


guess ill have to fix it before it goes up on the shelf

just added some more shelving to my wall

this is the wall before the new shelves are installed