RC10Talk - The Net's Largest Vintage R/C Community

did anyone on here ever replicate the steering like the rc10 on the box hard to tell how they did the main link for the steering.
Also what is the servo and receiver.

a piece of piano wire and two of those collars with the set screws.

would really like to see a pic if possible i know someone on here has replicated it i think i have seen it before.

2 90 degree bends, bring it up from the bottom, add 2 collars.

http://www.rc10talk.com/viewtopic.php?f=35&t=15487&start=105

i have one in my parts box ill get a pic up in the am

unless someone beats me to it

here you go

We're talking about the center link between the 2 bellcranks.

um not what iam looking for its the bar that connects the steering like the box art not to the servo. but thanks

yes scr8 u r right

the bel crank is pretty much the same thing just shorter

i have also seen it as justa single wire with no collar

i made it work thanks for the help!

now if anyone knows what servo was used and servo horn style i would like to know thanks.