Page 1 of 1
need rc10 tuber pics and info please!!
Posted: Wed Jul 17, 2013 3:33 pm
by Barnfind
I am trying to attempt to make an rc10 tuber chassis (probably wont happen for a while) but first I would like to make a 3D model on the computer to go by but I have virtually no information on these cars. any pictures of the frames would be greatly appreciated and if anybody does happen to have dimensions for them that would help to. Pretty much any info would be welcome such as the size tube they used and if it was a hollow tube or solid. thank you in advance for any help you can give me.
Re: need rc10 tuber pics and info please!!
Posted: Wed Jul 17, 2013 3:39 pm
by badhoopty
google.
class 3 buggy, sandrail, baja buggy, tube chassis, etc.
i use mainly 3/16" tube and rod for my builds, with some 1/8" rod for little details. mainly i braze with harris safety-silv 45 & 56 rod with harris safety-silv flux, and a mapp/o2 setup from home depot.
search tuber10 here and you should bring up my tuber post. i dont hang around here as much as i used to but im sure other dudes have tuber builds as well.
Re: need rc10 tuber pics and info please!!
Posted: Wed Jul 17, 2013 3:50 pm
by Barnfind
badhoopty wrote:search tuber10 here and you should bring up my tuber post. i dont hang around here as much as i used to but im sure other dudes have tuber builds as well.
Very nice build how long did it take you to build that?
Re: need rc10 tuber pics and info please!!
Posted: Wed Jul 17, 2013 5:26 pm
by badhoopty
Barnfind wrote:badhoopty wrote:search tuber10 here and you should bring up my tuber post. i dont hang around here as much as i used to but im sure other dudes have tuber builds as well.
Very nice build how long did it take you to build that?
i had another dude build it for me... now that i know how to do it, i could bang out that chassis in a couple weekends. but thats being very optimistic.
this is one i made myself, and it took well over 2 years. but im a picky mofo.
Re: need rc10 tuber pics and info please!!
Posted: Wed Jul 17, 2013 5:38 pm
by Barnfind
nice build looks pretty sweet. Do you know if you can weld the tubes together because I have no brazing stuff nor do I know how to braze.
i had another dude build it for me... now that i know how to do it, i could bang out that chassis in a couple weekends. but thats being very optimistic.
this is one i made myself, and it took well over 2 years. but im a picky mofo.
[/quote]