RC10Talk - The Net's Largest Vintage R/C Community

ive got my tamiya striker up for sale on kijiji and a guy message me about a trade for a tamiya m05 .. i gess its a 4wd mini ? i looked it up a little and it seams like a nice little car .. not much info on them on the site

is there anything i should look at for broken or damaged parts ..

if i do get it is there a eg (92-95) civic hb or ef ( 88-91) crx shell around that would fit it ..... or 94-01 integra ( fingers crossed )

thanks

well i gess i got a Abarth 500 Assetto Corse - M05

http://www.tamiyausa.com/product/item.php?product-id=58444





going to strip it down and rebuild .. looks like a fun little car

M-05s are fun little cars. Especially cool when you run in races with M-01/03/05s. The zip around like little go karts.

Trying to think of what to look at but nothing major comes to mind.

integra22t wrote:if i do get it is there a eg (92-95) civic hb or ef ( 88-91) crx shell around that would fit it ..... or 94-01 integra ( fingers crossed )

ABC Hobby made a 1/10 mini 2G Cyber CR-X and a 1/10 Integra Type R:

http://abchobbyusa.com/hondacr-xsir2ndgenbodyset.aspx



http://abchobbyusa.com/hondaintegratyperbodyset.aspx



Frewer made an EG Civic hatch and an Integra:





And I think HPI made an Integra and EG or EK hatch.

crx looks wicked ... but there is a teg ... hard choice

M05 was available as a CRX... http://www.tamiya.com/english/products/58503mugen_crx/index.htm

HPI made an EK9 Civic... http://www.hpiracing.com/en/part/7216

Hope those help...

Alex

first on the list is a bearing set and rebuild .. that ek9 is the body it came with .. glad to know .. that crx catches my eye every time i see it

Ugh, all Tamiya plastic bushings? Or just beat up bearings?

knixdad wrote:Ugh, all Tamiya plastic bushings? Or just beat up bearings?

Stock M05 doesn;t come with any bearings, just plastics and some bronze bushes.....

When you do the bearings, don't forget to do the steering bushings....

Alex

ya.. plastic bushigs from what i can see ... im a little confused on what bearings to get .. i looked on ebay but it lists a 14,16 and 18 pice kits for the m05 kits

the track in town races these if there is enough intrest this winter so we will see

I would take Tamiyas word for it.

12 5x11
6 5x8

integra22t wrote:ya.. plastic bushigs from what i can see ... im a little confused on what bearings to get .. i looked on ebay but it lists a 14,16 and 18 pice kits for the m05 kits

the track in town races these if there is enough intrest this winter so we will see

Yeah, what M5 said......

Going from the manual, there's six for the gearbox (2 x 1150 in holders in the chassis, and 1 x 1150 and 1 x 850 in each of the spur and counter gears), four in the steering (4 x 850), and eight bearings in the front and rear hubs (8 x 1150).

So, you're looking at a total of 12 x 1150 and 6 x 850 bearings. That's your 18 piece kit right there.... I would imagine the 14 piece kit does not include the steering. Not sure what the 16 piece would be!

Alex

Incredible_Serious wrote: Not sure what the 16 piece would be!

Alex

Just the steering bearings you see? Lol

gomachv wrote:

Incredible_Serious wrote: Not sure what the 16 piece would be!

Alex

Just the steering bearings you see? Lol

Possibly..... other thought I had was all the bearings except for the chassis side bearings that the front axles ride on. Seems a bit weird to provide an opening for a bearing, then change the size of it with a spacer..... must be some sort of option part that fits in place.

Alex

thanks guys .. ill look into the 18 piece kit more .. it not tamyia better know what they are doing lol