RC10Talk - The Net's Largest Vintage R/C Community

hello! i found this old 2 speed trans. kit while digging thru old parts box, can anyone help identify what car it was made for? I am sure it is for Associated cars but I cannot figure out which model.


gears and adaptors


idler gear and hardware







thanks!

its the HPI two speed. whether or not the topshaft will fit a stealth tranny remains to be seen.

yes, but it is made for a Team AE car/buggy. I was thinking it could work on my vintage RC10L pan car, but what's with the topshaft then..

Without a lof of fabrication and modification it wouldn't work for your 10L. Plus a 10L is fast enough without a two speed set up

I agree. Not gonna try to fit it into a rc10l, so that must mean its made for the RC10 stealth trans?

A two speed doesn't really do much on any electric car and it'd cripple a pan car like the 10L. Not only would you lose braking you'd lose the diff.

The Lazer Lite shadow had a 2 speed but only did so by adding a basic chain drive transmission to run the rear axle.


A good brushless ESC will do the job a 2speed spur will.

I agree with Phin. a two speed on an electric car sucks. if you understand how they shift you'll know why I say they suck. in the beginning of the pack, it will shift too soon. Mid pack is just right and by the end of the pack it won't shift at all

thank you guys for the replys!

i do not plan on using this 2 speed, however, i am rebuilding a vintage RC10 and a RC10L and would like to incorporate this into a display model (shelf queen)

It would be really cool to use this on a DS

I would love one of these for my dragster, soft hit off the line and bam 2nd gear kicks in 1/4 midway through the 132 feet for major acceleration.

Who’s got one for me