RC10Talk - The Net's Largest Vintage R/C Community

Did Andy's make rear arms for the JRX2, I have been looking but haven't seen anything. I do have a set of fronts...

Thanks for the help!

-Josh

they had standard and shorter "oval" front arms for losi. that's about it.

Andy's had 2 types of arms for the jrx2. They had a shorter oval arms...which was the same as the arms for the Kyosho Ultima...only difference was the hinge pin holes (3mm vs. 1/8). The also made the standard front arms for the jrx2 / pro.

They never made a rear arm (5 link or h arm) for those cars.

As an added bit a trivia, the Andys normal JRX2 arms are called part # 3800 Lightweight Front Arms on the package. But I had a set come into the store a year ago or more and they are actually heavier than the originals. So interesting how they called them lightweight, guess it depends on what you might be comparing them to. They are lighter then a 10 pound rock.

mytimac wrote:As an added bit a trivia, the Andys normal JRX2 arms are called part # 3800 Lightweight Front Arms on the package. But I had a set come into the store a year ago or more and they are actually heavier than the originals. So interesting how they called them lightweight, guess it depends on what you might be comparing them to. They are lighter then a 10 pound rock.

Hahahahaha