RC10Talk - The Net's Largest Vintage R/C Community

I only have 2 Losi cars. I just finished the XX CR today.
The XX CR is one nice car. Great design!!
I was too lazy to do a build thread.
The JRX-Pro was done last year sometime. Just thought I would throw it in the same post.

Very nice cars !
Could you tell me more about the motor mount on your XX-CR ? is it red anodized or painted ?

Cool! You got the xx together then I haven't seen one with the parts dyed red like that.

Those wheels might take some rit too

pottok wrote:Could you tell me more about the motor mount on your XX-CR ? is it red anodized or painted ?

Anodized. The original ones were silver then they were anodized blue and red apparently?

Yes Red Anodized
That is how I got it.

Thanks for your answers.
The blue anodized is original on tke BK kit but i didn't know the red anodized. Maybe home anodized or aftermarket part.

Supernaut wrote:Yes Red Anodized
That is how I got it.

You are very lucky indeed, thats a mk1 motor plate, in the 2-3 years i've been building my Losi cars, i've never seen one come up for sale

I knew a place that has 6 raw ones like this hanging on the wall...I'll make a call and see if they're still there

Charlie don't surf wrote:I knew a place that has 6 raw ones like this hanging on the wall...I'll make a call and see if they're still there

I'd settle for just one, part no A-9920:
Apologies for the thread hijacking!

That's them, I was told that the shop was cleared out a few years ago...but recently found out otherwise-

I actually got that buggy as a parts lot (cheap), I needed parts to finish another XX
I did not really know what I had until I saw all the parts together when it was delivered.
The parts were all individually bagged and then I noticed the front shock tower and looked it up.
There was basically a whole XX CR buggy there, I just had to clean it up and put it together.
The motor mount, RPM Gear Cover, and RPM Bumper included.
I also have some Old Stock that was included, bumper, sway bar kit, and a few other hard to find parts.

The other XX buggy will not be completed......

pottok wrote:Thanks for your answers.
The blue anodized is original on tke BK kit but i didn't know the red anodized. Maybe home anodized or aftermarket part.

Nice cars Supernaut!!

Regarding the motorplate - yes the kit motorplate was blue on the Kinwald, but that was a non-machined item... I brought a blue anodised machined motorplate new in a Losi header card to the original #9920 groove pattern - this would have before the release of the Kinwald kit - also on the rack was a machined plate in red

DerbyDan wrote:Regarding the motorplate - yes the kit motorplate was blue on the Kinwald, but that was a non-machined item... I brought a blue anodised machined motorplate new in a Losi header card to the original #9920 groove pattern - this would have before the release of the Kinwald kit - also on the rack was a machined plate in red

Hey Dan, I am sure they were custom anodised and put back in their header cards, I dont recall Losi ever making official ones, not even in black like Kinwald had on his XXT (which I need for my replica), not that it matters mind

jamin wrote:

DerbyDan wrote:Regarding the motorplate - yes the kit motorplate was blue on the Kinwald, but that was a non-machined item... I brought a blue anodised machined motorplate new in a Losi header card to the original #9920 groove pattern - this would have before the release of the Kinwald kit - also on the rack was a machined plate in red

Hey Dan, I am sure they were custom anodised and put back in their header cards, I dont recall Losi ever making official ones, not even in black like Kinwald had on his XXT (which I need for my replica), not that it matters mind

I think that may have been something that I had suggested - but cannot be sure.... with the appearance of some annodised plates stateside I have started to wonder if they were coloured from the factory?

DerbyDan wrote:

jamin wrote:

DerbyDan wrote:Regarding the motorplate - yes the kit motorplate was blue on the Kinwald, but that was a non-machined item... I brought a blue anodised machined motorplate new in a Losi header card to the original #9920 groove pattern - this would have before the release of the Kinwald kit - also on the rack was a machined plate in red

Hey Dan, I am sure they were custom anodised and put back in their header cards, I dont recall Losi ever making official ones, not even in black like Kinwald had on his XXT (which I need for my replica), not that it matters mind

I think that may have been something that I had suggested - but cannot be sure.... with the appearance of some annodised plates stateside I have started to wonder if they were coloured from the factory?

I've seen purple anno factory plates. The red ones seem to make me think Fantom re-worked them to match the red parts they made
Badd Boyz repackaged tons of AE parts and Losi parts in custom anno colors BITD too