Page 1 of 1
fireblade gear cover
Posted: Mon Jan 13, 2014 8:12 am
by al.48
Hi guys, bought a fireblade 2000 from ebay its missing a few bits, can find a body and undertray, but can't find a gear cover anyone point me towards one( schumacher UK don't have one.) Will post pics when it arrives, cheers all.
Re: fireblade gear cover
Posted: Tue Jan 14, 2014 3:04 am
by CAT3K
I don't think there's anyone making repro gear covers for the Fireblades, or any other Schumacher for that matter. Your best bet it just to keep an eye out on ebay, they will turn up eventually
Paul.
Re: fireblade gear cover
Posted: Thu Jan 16, 2014 3:47 am
by al.48
Cheers for that paul, could be a long rebuild yes.
Re: fireblade gear cover
Posted: Thu Jan 16, 2014 11:40 am
by adam lancia
You might almost be better off seeing if a Losi RPM gear cover would work, or any other manufacturer for that matter. You might have to drill and tap a couple of new holes in the motor plate but that would be better than no gear cover at all. Unless it's for a shelfer, in that case new is best but very hard to come by...