RC10Talk - The Net's Largest Vintage R/C Community

Hi Guys,
I have a never run Yok Works 91, but I have the problem that I don't have the original rear wheels, wing or original tyres for it.

It looks from a lot of the pictures on here that they had the square block front tyres and a long pin type tyre in the rear.

I know hotlaps/yok tyres used to have the part numbers on the sides, so could someone please let me know the part # for the tyres?

Regarding the wheels, I have pink 2.0" rears with 4 mounting holes and pink 2.2" fronts with 2 mounting holes. Which are the correct standard wheels? I believe it is the 2.2" with 2 holes right?

And finally, does anyone have any idea on the part# for the original rear wing? AE's high downforce rear wing looks close, but isn't exactly the same.

Thanks very much,

Jim

Jim, you need to get into the BST area. You will get a better response there and perhaps find just what you need

Here's how:
http://www.rc10talk.com/viewtopic.php?f=1&t=909

Hi Jim,

Just so you know what you are looking for when you enter the BST forum, here are the part numbers you will need-

Front Tires Works '91: TF-340M

Rear Tires Works '91: TR-38M or TR-32M (TR-38 are difficult to obtain)

Front Rims Works '91: ZC-831 Pink Design with 2 Holes

Rear Rims Works '91: ZC-837 Pink Design with 2 Holes

Rear Wing Works '91: ZC-108 (similar in design to Team Associated 6185 in case you can't locate one)

Hope this helps.

Vin

Thanks guys.
Sorry, yes I have seen the BST post, just haven't been able to sort out getting onto it yet.

Thanks very much for the part numbers Dual! I thought the tyres were 31's and 310's..Doh!