Page 1 of 1
Re release wheel options
Posted: Thu Aug 07, 2014 1:47 pm
by Medved
Ok so I took the plunge and ordered the re release worlds kit.
Does anybody know if there are any wheels other than those in the kit that will fit?
I've seen mention that B4 fronts may fit.
Back in the day I ran spoked wheels, and they were just cooler on UK tracks.
Any ideas if there is anything modern that will do the job?
Re: Re release wheel options
Posted: Thu Aug 07, 2014 1:49 pm
by jwscab
jc racing products makes 5 spokes in white yellow and black. they are old school narrow up front, so just take that into account, but otherwise, are a great option to mount 2.2" tires.
Re: Re release wheel options
Posted: Thu Aug 07, 2014 11:34 pm
by JK Racing
I dont think the JC wheels will fit the rear of the re-re worlds, they are designed for 1/4" axles and the re-re is 3/16".
B2/B3 rears fit and thunder tiger phoenix bx II as well (I honestly believe these are the wheels in the kit), B4 fronts for the re-re worlds.
Re: Re release wheel options
Posted: Fri Aug 08, 2014 12:20 am
by alien3t
the re re comes with b4 fronts. bearing style. and associated re made a 2.2 rear wheel for the car. yellow and white. but i think tower and amain might have them, if not associated website. the part number is under the parts and hop ups section of the car on rc10.com
Re: Re release wheel options
Posted: Fri Aug 08, 2014 2:07 am
by NickTheGreek
The jc racing b3 wheels will fit the worlds car ...... Those have spokes...
Associated #9588 for the front and 6805 for the rear....In white and yellow as mentioned.
Re: Re release wheel options
Posted: Mon Aug 11, 2014 12:31 am
by bully
Jconcepts b4 fronts can be used and they are spoked... Unsure about the rear but jc racing wheels would be easier than converting rear to b4 style..
Re: Re release wheel options
Posted: Mon Aug 11, 2014 3:04 am
by Proc1973
The jc racing b3 wheels definitely fit the worlds car, as I've swapped mine from one to the other. Great looking wheels