RC10Talk - The Net's Largest Vintage R/C Community

These have been kicking around on eBay for a while so I was just wondering if anyone has got/ used some as I didn't even know they existed. Were they originally available to the factory drivers only?

http://www.ebay.co.uk/itm/Vintage-team-losi-xx-front-25-degree-carrier-machined-rare-/151384965047?pt=Radio_Control_Vehicles&hash=item233f3f3fb7#ht_46wt_1024

(@Mods: If this need to be moved to the eBay section, please feel free to do so)

My Team Losi factory made front hub proto parts: http://www.rc10talk.com/viewtopic.php?f=27&t=3171&start=60
My XX with "25 degree front end" http://www.rc10talk.com/viewtopic.php?f=27&t=23418

If I remember correctly: If You only change 25-degree front hubs (like my proto parts and those on ebay), the steering geometry "went wrong", so both 25-degree hubs and 25-degree spindles needed to used to gain otherwise same/correct steering geometry.

Jirka

Jirka wrote:My Team Losi factory made front hub proto parts: http://www.rc10talk.com/viewtopic.php?f=27&t=3171&start=60
My XX with "25 degree front end" http://www.rc10talk.com/viewtopic.php?f=27&t=23418

If I remember correctly: If You only change 25-degree front hubs (like my proto parts and those on ebay), the steering geometry "went wrong", so both 25-degree hubs and 25-degree spindles needed to used to gain otherwise same/correct steering geometry.

Jirka

Jirka,

Thanks for links....looks like I missed both those threads!