Centerline Wheels for all cars, Scorpion Adapters, Giveaway!
Posted: Mon Aug 18, 2014 6:46 pm
Submitted for your perusal is our next Ltd. Edition product: True Scale 1.55" Centerline-style, 'Dual-Finish' Alloy Wheels! These are 6061-T6 Billet, very solid for runners but very pretty for Shelf Queens. They accept any 1.55" tyre, of which there are many, of all sizes and treads. Units shown (But not included, natch) are the Mickey Thompson Baja MTZ from RC4WD, who makes a lot of excaptionally nice tyres- See here: http://store.rc4wd.com/155-Tires_c_82.html
These are much different than my past units that only fit the Sand Scorcher (These do not fit that car's unique drive.) They have a lip around the rivet detail, the screws are more centered and nicer 0-80 SS cap screws: But foremost is the hand-spun center matte finish- The 2 finishes REALLY nake a difference. These will need about Zero work to look good unlike many of my previous wheels- All inner sharp edges are beveled or radiused, and tool marks are very light- You may not even bother to polish 'em, but it'll be easy if you do!
These can be made to fit about any car or truck with 12 mm. hex drive, even crosspin-drive with commonly available adapters. I can see 'em on rally cars, buggies, trucks...... Dimensional info below, check to see if they'll fit your project! (But don't Email me asking, do your own homework eh?)
Here's the thing- I love my cars. A lot. When you buy from me, you're buying very rare, low-number, quality pieces that I made for myself 1st and I only like the best. They reflect my passion, and it shows. I do everything myself, and the pics do not do these jewels justice.
WHAT YOU NEED TO KNOW BEFORE ORDERING-READ ALL!
All that is required to get on the cut list is a non-refundable deposit of $5 by clicking under the pics below- I will then send you a 'Balance Due' (to the SAME Paypal address-Mandatory) the deposit came from, just before they're ready to ship! Easy!
Realize that, with the choices available, if you zip through ordering & get the wrong thing I will NOT have inventory to fix your mistake! some info on the wheels, and the various options.
Outer Dia: 1.8" Bead : 1.59" Thickness: .820"
Rear offset, inner rim to bottom of hex: .340" Through hole: 4 mm. These can be driiled depending on your application
Front offset, inner rim to outer face of wheel: 538" Inner rim to bottom of inner bearing:.205
Here are the choices available:
Standard Set, includes 2 rear & 2 front that accept 5 x 11 mm. bearings
Scorpion-Specific set, which includes 2 rear and 2 front that accept the stock Kyosho bearings, AND 2 Aluminum hex adapters to run these or any 12 mm. hex wheel
4 Wheel Drive (All 4 Rears) for, uh, 4 wheel drive cars & trucks
Scorpion adapters are available separately for $ 14.99 a pair- Email me if you need some. Shown in Pic #1
Be SURE I have your shipping address WITH YOUR DEPOSIT/PAYMENT. Simply click under the pics below with the CORRECT description, and change the quantity & add Int'l. shipping ($7 per set) as needed. If link is not working, simply Email me & I'll hook you up.
Price for Standard & All 4 Rears is 109.99 (includes shipping in the US)
Price for Scorpion-Specific set is 119.99 (Includes adapters & shipping in US)
Do NOT send as 'Gift', and be SURE I have your shipping address!
Only US Dollars accepted (Duh)
Ship date is 'Estimated', as I never know how many I'll be making
International orders must be charged $7 PER SET shipping
HOW TO GET AN INSTANT DISCOUNT!
To get $10 off of each set purchased, you may buy outright (No deposit,) Payments (Including shipping fof $7/set for Int'l.s) MINUS $10/set may be made by sending to my PP address of [email protected] OR by using the Correct link below- Make SURE I know EXACTLY what you want (if not using the link) to avoid unfixable surprises!
Notes
Firgive my longwindedness! I hope it is clear that you must order the correct thing, as it cannot be fixed later! Remember, these, like all of our offerings, are ONLY available for a VERY SHORT TIME! We are a specialty manufacturer that does not maintain an inventory, and 85% of items are never re-done. Please submit your payment by midnight the 31st of August (12 days): I'll already be cutting, so if you're not on the cut list, you'll likely miss out.
To be sure to be notified of new releases in time, have your buddies go to http://www.rogueelementcomponents.com & sign up for my private mailing list: And you can simply click the 'Forward Email' button & they'll thank you for it, as will I.
Feel free to Email with any questions or suggestions, I value customer input!
Many Thanks,
Chris Cazan
Rogue Element Components
Paypal/Email address: [email protected]
Payment Due/Order Cutoff date: August 31st, 2014
Estimated Shipping Date: October 5th, 2014
-------------------------------------------------GIVEAWAY-------------------------------------------
As usual, I like to give a set away to a deserving, or at least lucky, individual! So, post here & on the 27th of August I'll plug 'em into the RNG and a winner will get a FREE set of his or her choice! Best of luck Chaps, Chris REC
These are much different than my past units that only fit the Sand Scorcher (These do not fit that car's unique drive.) They have a lip around the rivet detail, the screws are more centered and nicer 0-80 SS cap screws: But foremost is the hand-spun center matte finish- The 2 finishes REALLY nake a difference. These will need about Zero work to look good unlike many of my previous wheels- All inner sharp edges are beveled or radiused, and tool marks are very light- You may not even bother to polish 'em, but it'll be easy if you do!
These can be made to fit about any car or truck with 12 mm. hex drive, even crosspin-drive with commonly available adapters. I can see 'em on rally cars, buggies, trucks...... Dimensional info below, check to see if they'll fit your project! (But don't Email me asking, do your own homework eh?)
Here's the thing- I love my cars. A lot. When you buy from me, you're buying very rare, low-number, quality pieces that I made for myself 1st and I only like the best. They reflect my passion, and it shows. I do everything myself, and the pics do not do these jewels justice.
WHAT YOU NEED TO KNOW BEFORE ORDERING-READ ALL!
All that is required to get on the cut list is a non-refundable deposit of $5 by clicking under the pics below- I will then send you a 'Balance Due' (to the SAME Paypal address-Mandatory) the deposit came from, just before they're ready to ship! Easy!
Realize that, with the choices available, if you zip through ordering & get the wrong thing I will NOT have inventory to fix your mistake! some info on the wheels, and the various options.
Outer Dia: 1.8" Bead : 1.59" Thickness: .820"
Rear offset, inner rim to bottom of hex: .340" Through hole: 4 mm. These can be driiled depending on your application
Front offset, inner rim to outer face of wheel: 538" Inner rim to bottom of inner bearing:.205
Here are the choices available:
Standard Set, includes 2 rear & 2 front that accept 5 x 11 mm. bearings
Scorpion-Specific set, which includes 2 rear and 2 front that accept the stock Kyosho bearings, AND 2 Aluminum hex adapters to run these or any 12 mm. hex wheel
4 Wheel Drive (All 4 Rears) for, uh, 4 wheel drive cars & trucks
Scorpion adapters are available separately for $ 14.99 a pair- Email me if you need some. Shown in Pic #1
Be SURE I have your shipping address WITH YOUR DEPOSIT/PAYMENT. Simply click under the pics below with the CORRECT description, and change the quantity & add Int'l. shipping ($7 per set) as needed. If link is not working, simply Email me & I'll hook you up.
Price for Standard & All 4 Rears is 109.99 (includes shipping in the US)
Price for Scorpion-Specific set is 119.99 (Includes adapters & shipping in US)
Do NOT send as 'Gift', and be SURE I have your shipping address!
Only US Dollars accepted (Duh)
Ship date is 'Estimated', as I never know how many I'll be making
International orders must be charged $7 PER SET shipping
HOW TO GET AN INSTANT DISCOUNT!
To get $10 off of each set purchased, you may buy outright (No deposit,) Payments (Including shipping fof $7/set for Int'l.s) MINUS $10/set may be made by sending to my PP address of [email protected] OR by using the Correct link below- Make SURE I know EXACTLY what you want (if not using the link) to avoid unfixable surprises!
Notes
Firgive my longwindedness! I hope it is clear that you must order the correct thing, as it cannot be fixed later! Remember, these, like all of our offerings, are ONLY available for a VERY SHORT TIME! We are a specialty manufacturer that does not maintain an inventory, and 85% of items are never re-done. Please submit your payment by midnight the 31st of August (12 days): I'll already be cutting, so if you're not on the cut list, you'll likely miss out.
To be sure to be notified of new releases in time, have your buddies go to http://www.rogueelementcomponents.com & sign up for my private mailing list: And you can simply click the 'Forward Email' button & they'll thank you for it, as will I.
Feel free to Email with any questions or suggestions, I value customer input!
Many Thanks,
Chris Cazan
Rogue Element Components
Paypal/Email address: [email protected]
Payment Due/Order Cutoff date: August 31st, 2014
Estimated Shipping Date: October 5th, 2014
-------------------------------------------------GIVEAWAY-------------------------------------------
As usual, I like to give a set away to a deserving, or at least lucky, individual! So, post here & on the 27th of August I'll plug 'em into the RNG and a winner will get a FREE set of his or her choice! Best of luck Chaps, Chris REC
