Thanks. It really was a one-off as I only had basic tools. It's currently in pieces awaiting a few tweaks after I finish three other projects.
I still haven't got a decent camera for filming. Buying a house seems to get in the way of playing with and modifying RC cars. I reckon that's the same or similar story for 90% of members on this forum.
Started with the basic idea of SRB, pretty much keep a tiny bit of SRB and some after market structural geometry. Plenty of custom made, CNC & hand made parts too.
Together also show my out of whack Mugen Bulldog lol ;)
I've had these thoughts swimming around my head for a couple of years. I've always wanted to combine a MIP 4-10 kit with a fully hopped up Rough Rider SRB chassis. I needed to do some R&D with parts to see if my idea would work. So before I start...
Last post
Blue and gold works so well... and that transmission is so mythical, this should clearly end in a BotY kind of final competition when done! :shock:
Since it is not a secret that Tamiys is going to re-re the SRBs soon and a lot of SRB guys would not mind a 4wd conversion, I think we shall try to petition one of the aftermarket manufacturers to also develop a SRB 4wd conversion kit or simply...
Last post
Didn't the SRB 4wd use a speedo cable to power the front tranny. The ones I saw looked interesting but far from something I would want to invest loads of cash in just to have a unique piece. There's lots of other cars that interest me more. Just my...
In admiration of 1300GT's 4wd SRB, I'm starting on my own attempt at building a similar car. I figured out a B4 slipper gearbox setup in this thread -
Now I'm mocking things up for the chassis. 2 3D printed replica MIP gearboxes, 3D Printed front...
Last post
Its virtually impossible to eliminate bump steer on a trailing arm 4wd car as the steering wants to be in front of the gearbox , whole thing is looking really good .
Here's my SRB racer. I always wanted a hot SRB racer back in the 80's. So I decided to create one. I put this one together using Buggy Champ parts. The chassis is 2.75mm thick carbon fibre cut with a Dremel then filed and sanded by me. I made...
I went to a swap meet today and found this cool Sand Scorcher based racer. The event was held at a fair grounds complex and was mainly focued on 1:1 scale cars. I walked around all day and the only vintage stuff I saw was a half together frog. I saw...
Last post
Nice Score. Lots of RCH and CRP hop-ups. I would guess you got an awesome deal.
Anyone can share a good scan of the MIP 4X400 4wd conversion for Tamiya SRB??
Thanks in advance :)
Last post
I have the instructions tucked away in an inaccessible box. What was posted above are the instructions which are really rudimentary. Basically you need to play around with the placement of the front tranny which allows the dog bones to set in a...
These are some pics of my Tamiya 4WD's. Boomerang and Hot Shot are both runners. The Hot Shot is still being developed. I am in the process of makings a better steering system. My Super Shot runner is my next project. Most of my cars feature some...
CommonCrawl [Bot] and 1 guest