Schweet NEW 'Super-Scale' 4WD wheels- Info & Giveaway!
Posted: Mon Oct 06, 2014 4:09 pm
Yup! Yay! Hooray! So, our latest item is out: 'Super-Scale' 1.55" Alloy 4WD Wheels! Yes, I just did some wheels, but these are LOTS different- No effort spared to make these as real as humanly possible. The 20 degree angle on the faces. Separate, self-centering faceplates. SS Acorn-Head bolts. Engraved axle nuts. Honestly, these are my favorite product release thus far, and are STRICTLY LIMITED to ONLY 120 sets!
These are solid 6061-T6 Billet, 12 mm. Hex drive, .1" (2.5 mm.) Negative Offset. Outer Dia: 1.8" Bead : 1.59" Thickness: .820" They accept any 1.55" tyre, of which there are many, of all sizes and treads. Prototype units are shown with 3 of the RC4WD tyres- See here: http://store.rc4wd.com/155-Tires_c_82.html (Tyres not included.)
There is a lack of new, nice 1.55" wheels available & this is a crime! There are TWO styles, '10-hole' and '8-Slot' (Pics below.) With tyre options, these can go on any 4WD, and will make it more scale than any other single thing you can do. Once these are in your hand, you'll get it- I've said before and will again that pics don't do these justice.
I am offering these for an incredible deal and only because I got a deal on some pre-cut material and am passing that on to the consumer (I'm so swell!) So,for the price, wise chaps will buy extras as you will be able to make $ on 'em in the very near future- A lot of guys are gonna miss out. This time the cutoff date is not the only consideration and I fully expect these to blow out, so...
Here's the thing- I love my cars. A lot. When you buy from me, you're buying very rare, low-number, quality pieces that I made for myself 1st and I only like the best. They reflect my passion, and it shows according to many satisfied customer Emails.
WHAT YOU NEED TO KNOW BEFORE ORDERING-READ ALL!
All that is required to get on the cut list is a non-refundable deposit of $5 by clicking under the pics below by October 18th- I will then send you a 'Balance Due' (to the SAME Paypal address-Mandatory) the deposit came from, just before they're ready to ship! Easy!
Be SURE I have your shipping address WITH YOUR DEPOSIT/PAYMENT. Simply click under the pics below with the CORRECT description, and change the quantity & add Int'l. shipping ($12 per set) as needed. If link is not working, simply Email me & I'll hook you up.
Remember these are LIMITED TO 120 SETS, so sooner is better! The cutoff date is NOT a guarantee this time!
Price per set is 109.99 (Includes shipping in US)
Do NOT send as 'Gift', and be SURE I have your shipping address!
Only US Dollars accepted (Duh)
Ship date is 'Estimated', as I never know how many I'll be making
International orders must be charged $12 PER SET shipping
HOW TO GET AN INSTANT DISCOUNT - 99.99 Per Set! Incredible!
To pay only 99.99 for each set purchased, you may buy outright (No deposit,) Payments (Including shipping fof $12/set for Int'l.s) may be made by sending to my PP address of [email protected] OR by using the Correct link below- Make SURE I know EXACTLY what you want (if not using the link) to avoid unfixable surprises.
Notes
We are a specialty manufacturer that does not maintain an inventory, and most items are never re-done again. Please submit your payment by midnight the 18th of October (12 days): I'll already be cutting, so if you're not on the cut list, you'll likely miss out.
To be sure to be notified of new releases in time, have your buddies go to http://www.rogueelementcomponents.com & sign up for my private mailing list: And you can simply click the 'Forward Email' button & they'll thank you for it, as will I.
Feel free to Email with any questions or suggestions, I value customer input!
Many Thanks,
Chris Cazan
Rogue Element Components
Paypal/Email address: [email protected]
Deposit Due/Order Cutoff date: October 18th, 2014
Estimated Shipping Date: November 30th, 2014
******************GIVEAWAY!******************
Unbelieveably, even though these are VERY limited, you chaps get a shot at winning a FREE set !?! Ermagerd!! Just grab the nearest Interweb -Yuman Interface device & post something telling me why you want and think you deserve 'em. (It won't matter as the winner is picked with a RNG, but it sounds good eh?) Winner posted on Oct. 14th: Winner MUST CHECK BACK within a week of that date & get me your mailing info or forfeit the wheels, that's the only rule, not bad methinks. Good Luck All, Chris REC
These are solid 6061-T6 Billet, 12 mm. Hex drive, .1" (2.5 mm.) Negative Offset. Outer Dia: 1.8" Bead : 1.59" Thickness: .820" They accept any 1.55" tyre, of which there are many, of all sizes and treads. Prototype units are shown with 3 of the RC4WD tyres- See here: http://store.rc4wd.com/155-Tires_c_82.html (Tyres not included.)
There is a lack of new, nice 1.55" wheels available & this is a crime! There are TWO styles, '10-hole' and '8-Slot' (Pics below.) With tyre options, these can go on any 4WD, and will make it more scale than any other single thing you can do. Once these are in your hand, you'll get it- I've said before and will again that pics don't do these justice.
I am offering these for an incredible deal and only because I got a deal on some pre-cut material and am passing that on to the consumer (I'm so swell!) So,for the price, wise chaps will buy extras as you will be able to make $ on 'em in the very near future- A lot of guys are gonna miss out. This time the cutoff date is not the only consideration and I fully expect these to blow out, so...
Here's the thing- I love my cars. A lot. When you buy from me, you're buying very rare, low-number, quality pieces that I made for myself 1st and I only like the best. They reflect my passion, and it shows according to many satisfied customer Emails.
WHAT YOU NEED TO KNOW BEFORE ORDERING-READ ALL!
All that is required to get on the cut list is a non-refundable deposit of $5 by clicking under the pics below by October 18th- I will then send you a 'Balance Due' (to the SAME Paypal address-Mandatory) the deposit came from, just before they're ready to ship! Easy!
Be SURE I have your shipping address WITH YOUR DEPOSIT/PAYMENT. Simply click under the pics below with the CORRECT description, and change the quantity & add Int'l. shipping ($12 per set) as needed. If link is not working, simply Email me & I'll hook you up.
Remember these are LIMITED TO 120 SETS, so sooner is better! The cutoff date is NOT a guarantee this time!
Price per set is 109.99 (Includes shipping in US)
Do NOT send as 'Gift', and be SURE I have your shipping address!
Only US Dollars accepted (Duh)
Ship date is 'Estimated', as I never know how many I'll be making
International orders must be charged $12 PER SET shipping
HOW TO GET AN INSTANT DISCOUNT - 99.99 Per Set! Incredible!
To pay only 99.99 for each set purchased, you may buy outright (No deposit,) Payments (Including shipping fof $12/set for Int'l.s) may be made by sending to my PP address of [email protected] OR by using the Correct link below- Make SURE I know EXACTLY what you want (if not using the link) to avoid unfixable surprises.
Notes
We are a specialty manufacturer that does not maintain an inventory, and most items are never re-done again. Please submit your payment by midnight the 18th of October (12 days): I'll already be cutting, so if you're not on the cut list, you'll likely miss out.
To be sure to be notified of new releases in time, have your buddies go to http://www.rogueelementcomponents.com & sign up for my private mailing list: And you can simply click the 'Forward Email' button & they'll thank you for it, as will I.
Feel free to Email with any questions or suggestions, I value customer input!
Many Thanks,
Chris Cazan
Rogue Element Components
Paypal/Email address: [email protected]
Deposit Due/Order Cutoff date: October 18th, 2014
Estimated Shipping Date: November 30th, 2014
******************GIVEAWAY!******************
Unbelieveably, even though these are VERY limited, you chaps get a shot at winning a FREE set !?! Ermagerd!! Just grab the nearest Interweb -Yuman Interface device & post something telling me why you want and think you deserve 'em. (It won't matter as the winner is picked with a RNG, but it sounds good eh?) Winner posted on Oct. 14th: Winner MUST CHECK BACK within a week of that date & get me your mailing info or forfeit the wheels, that's the only rule, not bad methinks. Good Luck All, Chris REC
I'd have to knock up an adapter to fit them to something Schumacher though, or hell, I'd have to build a crawler (which I've been meaning to do for years, you should see the mess my garden is in, It would make an awesome crawler track 
)