RC10Talk - The Net's Largest Vintage R/C Community

I'm restoring a early B2. Did the B2 front tires that came with the kit come with blank sidewall pro line tires? The correct front wheel size is 2.125"? Thanks!

B2 Sport or B2 Stealth

#9000 team/stealth kit

may have had some blank tires, but I have these with a 9000

Thank You!!

Mine has the same as Brian's.

The B2 manual lists the 6877 Edge tire for the Race version:

http://www3.omnimodels.com/cgi-bin/woi0001p?&I=ASCC6877

and 6874 flat 4 rib tire for the Sport version - did not see one available... if that helps any

The picture of the complete car on the manual cover has something on the sidewall, but it's too blurry to make out what it says in the pdf that I have.

Thanks R Cane

This is what Niki told me when I asked him about B2 wheels:

You can use ASC9480 or ASC9481 front wheels on NIX91 and B2 if you find those somewhere. Wheel axle ASC6220 should be used on NIX91 and B2.

Easiest way is to buy RC10 rere-Worlds wheels + axle ASC7459 and cut front wheel inner section off. Example http://www.rc10talk.com/viewtopic.php?f=99&t=36419&start=30#p405616

I'm not 100% sure but I think these Duratrax wheels (dtxc9840, dtxc9842, dtxc9848, dtxc9861) match old B2. Can be used on NIX91 also then with standard front wheel axle ASC6220.

Rear wheels: For example ASC6805 (RC10 rere-Worlds) or old B2/B3 rear wheels.