Page 1 of 1
RC10GT Factory Team build
Posted: Thu Jan 29, 2015 10:14 pm
by sschering
I picked up this Team truck last week.
I was thinking of building another mid electric but this one is supposed to be a runner so I'm keeping it Nitro.
The shocks need seals.
Rear CF tower is cracked.
It needs a clutch bell and brake cam.
The plan so far is stainless screws all around, replace the missing bits and an overall cleanup and repair.
Re: RC10GT Factory Team build
Posted: Fri Jan 30, 2015 2:24 am
by DaveM
Hi,
Nice, keep us posted with the cleanup.
Should be good
Dave.
Re: RC10GT Factory Team build
Posted: Fri Jan 30, 2015 8:21 am
by THEYTOOKMYTHUMB
sschering wrote:It needs a clutch bell and brake cam.
I
might be able to help here. If I can find it that is.
If so, you can have them. I'll try and look this weekend if you haven't already secured some.
Re: RC10GT Factory Team build
Posted: Fri Jan 30, 2015 9:41 am
by sschering
THEYTOOKMYTHUMB wrote:sschering wrote:It needs a clutch bell and brake cam.
I
might be able to help here. If I can find it that is.
If so, you can have them. I'll try and look this weekend if you haven't already secured some.
That would be awesome.. Thanks!
Re: RC10GT Factory Team build
Posted: Wed Feb 04, 2015 6:22 pm
by sschering
Is #6440 the proper rebuild kit for the Team GT blue shocks?
Re: RC10GT Factory Team build
Posted: Wed Feb 04, 2015 8:39 pm
by shoman24v
Yes.
Re: RC10GT Factory Team build
Posted: Thu Feb 05, 2015 11:49 am
by THEYTOOKMYTHUMB
sschering wrote:THEYTOOKMYTHUMB wrote:sschering wrote:It needs a clutch bell and brake cam.
I
might be able to help here. If I can find it that is.
If so, you can have them. I'll try and look this weekend if you haven't already secured some.
That would be awesome.. Thanks!
Whoops, I forgot about this!
I found a 15 tooth clutch bell over the weekend, but I think I have more stuff around somewhere. PM me your address and I'll send you whatever I can find nitro related.
Re: RC10GT Factory Team build
Posted: Sun Feb 15, 2015 2:48 am
by sschering
got the parts! thanks! jsut waiting on bearings and c clips to arrive.
Re: RC10GT Factory Team build
Posted: Thu Feb 19, 2015 6:08 pm
by sschering
Day off tomorrow! things will start happening..
Edit.. I'd love to say I got something done this weekend..
I fixed my dryer, I fixed my wife's car, I helped my daughter with a school project.. Working on the GT didn't happen
Then just to add to the backlog I bought an MGT roller.. One more little set of wheels to care for lol
The wife said to 'FIX' my son's old Newbright 1/8 Hummer.. Sliding a Dewalt powered MGT chassis under the body should fix it up real nice.
Re: RC10GT Factory Team build
Posted: Tue Feb 24, 2015 5:05 am
by Harvey Wood
Great! I know where RC10GTs are here around the local area. On the off chance that they made a rebound I'd go lift one up.
Re: RC10GT Factory Team build
Posted: Mon Mar 09, 2015 11:20 am
by sschering
Geez I've been totally sidelined working on an MGT E conversion chassis meets New Bright body project for my son.. I'll be back on this one soon.