Page 1 of 1
Need ref for this part
Posted: Wed Feb 25, 2015 3:04 pm
by prp
Hi guys,
Well I search the right ref for this part, it's not the ZC 432 like on the pic:
- $_12.jpg (32.09 KiB) Viewed 1467 times
- $_12.jpg (32.09 KiB) Viewed 1467 times
Thanks for help and if any body have this
Re: Need ref for this part
Posted: Wed Feb 25, 2015 3:50 pm
by scr8p
They look like the right adapters to me. Unless I'm not understanding what you are asking.
Re: Need ref for this part
Posted: Thu Feb 26, 2015 2:10 am
by prp
I ordering ZC 432 and they're not the same like you or the pic
Re: Need ref for this part
Posted: Thu Feb 26, 2015 2:51 am
by jwscab
post a pic of the 'wrong' part and maybe we can decipher what it is. likely had the wrong header card installed?
Re: Need ref for this part
Posted: Thu Feb 26, 2015 3:02 am
by prp
I have this one for the ZC 432
Re: Need ref for this part
Posted: Thu Feb 26, 2015 12:05 pm
by Mr. ED
Ah, we are playing 'spot the difference'... I think what you're trying to show is the height of the cylindrical part? There is much less material above the thread for the setscrew on your part than on the others. Right?
Maybe that was a running change over the production period and they did not make a new partnumber for it?
Re: Need ref for this part
Posted: Thu Feb 26, 2015 4:11 pm
by jwscab
That is rather strange. They look to be about 1mm wider than the stock photo, then the center part is trimmed back some.
Re: Need ref for this part
Posted: Thu Feb 26, 2015 4:34 pm
by fakiee
I just thought Yokomo used the same part number along their timeline, could be way off here??
- the part is correct at the time of the 870c - front hub
Used same part # at the time of Works 94 - front hub
Re: Need ref for this part
Posted: Thu Feb 26, 2015 10:33 pm
by aip47-2008
prp wrote:I have this one for the ZC 432
The attachment rsz_dsc03351.jpg is no longer available
That part is actually different. Part Number ZC-432D As shown below.
Re: Need ref for this part
Posted: Thu Feb 26, 2015 11:21 pm
by jwscab
There's the guy with the answers( and I swear every yokomo part ever made).