Page 1 of 1
ID help again!
Posted: Sun Mar 01, 2015 5:43 pm
by _timmy_
Another day, another box of bits and another unidentified part, or in this case 4. These turned up with a very rough '94 i got for parts, they were in a small bag of odds and sods. I'm thinking, as there are no grub screws for mounting, that they could be for a 2wd maybe.... Any help with part no's or their intended use appreciated as always.
cheers Tim
Re: ID help again!
Posted: Sun Mar 01, 2015 5:45 pm
by GoMachV
No pin slots and no setscrews points to them being for kyosho. They ran a taper
Re: ID help again!
Posted: Sun Mar 01, 2015 9:59 pm
by crawlerbug
Re: ID help again!
Posted: Mon Mar 02, 2015 3:28 am
by isobarik
yeah made for kyosho ...
the height on they is it exactly the same on all four or are 2 lower and 2 higher ???
mvh isobarik
Re: ID help again!
Posted: Mon Mar 02, 2015 3:57 pm
by _timmy_
crawlerbug - great catch, thanks
isobarik - all 4 are identical in size
Not really sure why anyone would want to put yoke wheels on a kyosho though.....
Re: ID help again!
Posted: Tue Mar 03, 2015 2:51 pm
by Mr. ED
Just because yokomo was the first to release 2.2 inch wheels.
They also made a set for 'Tamiya' cars: basically an adapter that sits on top of 12mm hexes and therefor also works perfect with kyosho cars