Page 1 of 1

Mercedes Benz C Class DTM pull start engine?

Posted: Mon Mar 16, 2015 1:58 pm
by wez-li
Hi all, Bit of advice needed.

I've got this Kyosho Mercedes C Class DTM .10 engine powered, but I can't find a manual anywhere.

In fact, i can't find any information on this particular model at all, I know it's from 1993 (printed on the box) and appears to be based on a late optima mid/lazer (same wheelbase and seems to share wishbones and other bits)

So, any more info will be appreciated.

Here are some pics

box

Image

not bad for 22 years old

Image


never been run properly??

Image

previous owner made a start with the body

Image

also do these come prebuilt? box states "partially assembled" how much is done at the factory?

Thanks in advance

Re: Mercedes Benz C Class DTM pull start engine?

Posted: Mon Mar 16, 2015 6:20 pm
by romulus22
The most information I can give you. Is that chassis is based on the, 1/10 Inferno 10 buggy. Which also uses parts from previous cars. A Peugeot something rally type car. But your car minus suspension and top plate is almost identical to the Inferno 10. I have one in my gallery if you want to see what it looks like.

Todd

Re: Mercedes Benz C Class DTM pull start engine?

Posted: Tue Mar 17, 2015 4:10 pm
by wez-li
Thanks Todd, yeah it looks very similar to your inferno 10. I just can't understand why I can't find hardly any information about this model online. It's almost like it doesn't exist :)

Re: Mercedes Benz C Class DTM pull start engine?

Posted: Tue Mar 17, 2015 4:53 pm
by RichieRich
Yeah, this is weird. I checked my 1993 and 1994 Tower Hobbies catalogs and I don't see it listed.

Re: Mercedes Benz C Class DTM pull start engine?

Posted: Tue Mar 17, 2015 8:13 pm
by romulus22
To be honest. I doubt its a '93. Thats probably just a copyrite date for something random. That's what year the Inferno 10 debut and that was an all new chassis layout if I remember correctly. I would search in the 95-97 timeframe. They also had an EP version. My guess is it was a very short run near the end of this chassis in certain countries only.

Re: Mercedes Benz C Class DTM pull start engine?

Posted: Tue Mar 17, 2015 11:30 pm
by RichieRich
I think I found it? Page 126 of the 2000 catalog.

Re: Mercedes Benz C Class DTM pull start engine?

Posted: Wed Mar 18, 2015 6:11 am
by romulus22
Those are the spider chassis cars.

Re: Mercedes Benz C Class DTM pull start engine?

Posted: Wed Mar 18, 2015 7:32 am
by GoMachV
Check the link to my website in my sig, look up the rc car action mag from June 1995, page 52 they have a review of the same GP-10 platform with a BMW body.

Re: Mercedes Benz C Class DTM pull start engine?

Posted: Wed Mar 18, 2015 2:24 pm
by wez-li
That's brilliant thanks.

Love that E36 M3 body too!

Re: Mercedes Benz C Class DTM pull start engine?

Posted: Sat Mar 21, 2015 5:03 am
by EvolutionRevolution
If your car has Lazer wishbones, then it may have a certain suspension upgrade set that was also included with some late GP-10/Inferno 10 models right in the box.

Re: Mercedes Benz C Class DTM pull start engine?

Posted: Sun Mar 22, 2015 6:37 am
by wez-li
EvolutionRevolution wrote:If your car has Lazer wishbones, then it may have a certain suspension upgrade set that was also included with some late GP-10/Inferno 10 models right in the box.
I'm no expert on lazers, these are the front wishbones if it helps.

Image