Page 1 of 1
Brushless RC10T
Posted: Thu Sep 21, 2006 4:38 am
by hano5446
Found my old RC10T while moving and need some help to turn this thing into a beach basher with a Novak ss5800
system I had lying around, how can I beef up my drive train? lookink for bearings troughout my truck, what can I do?
My BL RC10T..
Posted: Thu Sep 21, 2006 12:12 pm
by Chewbacca
Hi hano5446,
in
THIS THREAD I've posted my BL RC10T. The drivetrain is pretty bulletproof, consider buying the best (ceramic) Diff balls U can get. Of couse berrings are a MUST!
I know you'll love it.....
Chewie.
Posted: Thu Sep 21, 2006 2:50 pm
by Asso_man!
I think he was talking about a vintage rc10t whereas you are talking about a T4, its youngest son...
Posted: Thu Sep 21, 2006 5:40 pm
by Daddeo
It looks like Chewbacca's truck is a RC10T.
Posted: Thu Sep 21, 2006 6:19 pm
by Chewbacca
Daddeo wrote:It looks like Chewbacca's truck is a RC10T.
It sure is
Chewie.
Posted: Thu Sep 21, 2006 6:33 pm
by andrewm707
i got an rc10t with a novak ss5800 setup in it. the truck is a stock #7001 with the bearings. if i tighten up the slipper on the stealth it will cartwheel over with an 87 tooth spur and an 18 tooth pinion. only thing i have replaced has been the spur gear 'cause the motor got loose and burned off all the tooth tips. the dogbone hub ends are getting worn so i will probably do soon and recommend a cvd conversion. other than that just periodically take the stealth apart and lube it and keep it clean. i run about 2 packs every other day through it since i put the 5800 in it a few months ago and ran countless packs through it way back when. heres some pics of how a beater should look
Mahalo!!!!!!
Posted: Fri Sep 22, 2006 1:07 am
by hano5446
Thanks everyone I hope to take it to the beach here in Hawaii by next weekend equiped with paddles
MAHALO!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!