Quadra-symmetric RC10

Post by **GoMachV** » Sun Jul 19, 2015 11:59 pm

Based on a world's car so 71 front and 1.32 body 1.02 shaft rears

Post by **Niki** » Mon Jul 20, 2015 1:16 pm

jaro wrote:Can anyone tell me the distance between inner and outer hinge pins centres on the wishbones?
Liking this thread, could be my next build

PM sent...

Post by **Chewbacca** » Sat Jul 25, 2015 10:01 pm

Wasn't the RPM worlds conversion kit somewhat in the direction of quadra symmetric?

Post by **Niki** » Sun Jul 26, 2015 11:41 am

No. Inner hinge pins are not within same distance from centerline and arms doesn't share same lenght front/rear.

-Niki-

Post by **jwscab** » Sun Jul 26, 2015 1:54 pm

I would venture to agree with Chewbacca, in that is was somewhat in the direction. The arms weren't exactly the same length, and the hinge pins didn't align, but it was a decent approximation given the chassis and wheel offsets of the time.

this one Niki made is pretty awesome. If I was a racer, I would be building this to race.

Post by **JK Racing** » Sun Jul 26, 2015 5:06 pm

jwscab wrote:If I was a racer, I would be building this to race.

Post by **zleader** » Sun Aug 16, 2015 2:43 am

my shock towers just came in.... now to shapeways to pickup other parts.

Post by **GoMachV** » Sun Aug 16, 2015 3:01 am

zleader wrote:my shock towers just came in.... now to shapeways to pickup other parts.

8 days total to Canada? I think that's a personal best for me! Usually they like to tie things up along the way.

Post by **zleader** » Sat Aug 22, 2015 1:45 am

8 days total to Canada? I think that's a personal best for me! Usually they like to tie things up along the way.

Thank You

I looking forward to getting my build going. I want to start racing my rc10 this fall for a indoor carpet season. My goal is to race for fun and not get to caught up in the track talk.

Post by **RichieRich** » Wed Sep 09, 2015 7:05 pm

Ok, I'm looking to upgrade my car below with this set. It currently has the Klein arms (which are kinda short) and the B44 cvds + B4 front spindles. I'm guessing the shapeways bits are the best option for actual use?

Post by **Niki** » Wed Sep 09, 2015 8:59 pm

I.materialise in Belgium is best option at the moment. Price and quality both good.
http://i.materialise.com/shop/item/quadra-rc10-arms-set

-Niki-

Post by **Asso_man!** » Wed Sep 09, 2015 9:10 pm

Niki wrote:I.materialise in Belgium is best option at the moment. Price and quality both good.
http://i.materialise.com/shop/item/quadra-rc10-arms-set

-Niki-

If you order through me I will include chocolate, waffles and Trappist beer

Seriously now Shapeways even in the Netherlands is no more an option? This Belgian company would make even better parts I understand?

Post by **Niki** » Wed Sep 09, 2015 9:21 pm

My Shapeways Netherlands orders has allways been good. I haven't noticed difference in Shapeways NL vs Imaterialise quality. Still there is a price difference...

Post by **RichieRich** » Wed Sep 09, 2015 9:37 pm

Yeah, the price difference is rather large.

Is the performance of the i.materialize polyamide similar to the shapeways white nylon?

Post by **JK Racing** » Thu Sep 10, 2015 2:47 am

Niki, are the arms I got from you Shapeways or Imaterialize?

Which ever one they are, the quality is fantastic.

RC10Talk - The Net's Largest Vintage R/C Community

Quadra-symmetric RC10

Re: Quadra-symmetric RC10

Re: Quadra-symmetric RC10

Re: Quadra-symmetric RC10

Re: Quadra-symmetric RC10

Re: Quadra-symmetric RC10

Re: Quadra-symmetric RC10

Re: Quadra-symmetric RC10

Re: Quadra-symmetric RC10

Re: Quadra-symmetric RC10

Re: Quadra-symmetric RC10

Re: Quadra-symmetric RC10

Re: Quadra-symmetric RC10

Re: Quadra-symmetric RC10

Re: Quadra-symmetric RC10

Re: Quadra-symmetric RC10

Who is online