RC10Talk - The Net's Largest Vintage R/C Community

on my DS:

http://cgi.ebay.com/Alloy-Rear-Gearbox-Fits-Associated-Rc10gt-Pro-Rc10-Gt_W0QQitemZ190188599480QQihZ009QQcategoryZ19168QQssPageNameZWDVWQQrdZ1QQcmdZViewItem

http://cgi.ebay.com/Vintage-Associated-RC10-aluminum-rear-A-arm-mounts_W0QQitemZ320205061645QQihZ011QQcategoryZ44017QQssPageNameZWDVWQQrdZ1QQcmdZViewItem

http://cgi.ebay.com/Alloy-F-R-Body-Mount-Post-Fits-RC10GT-RC10-GT-PRO_W0QQitemZ200191413245QQihZ010QQcategoryZ19168QQssPageNameZWDVWQQrdZ1QQcmdZViewItem

what body could i run

The alloy gearbox won't work unless I remember wrong: you were running an electro motor , no?
The alloy arm-mounts, I think should work, yet, there's no info from the seller as to which toe-in or caster angle these have. So even if they fit you don't have a guarantee they will work well as a set-up for your road machine.
The body posts are for the nitro version again, so might not be a straight bold-on, yet if you're handy ,it should be ok I guess

opps, damn it! forgot that for a sec.

hhmmmm

if i can get a body t work with those.....

Don't know about the other bits, but those rear arm mounts are a lot cheaper from GPMs distributor
http://www.hobbyetc.com/cgi-bin/item.cgi?part_id=10946

It might just be my old eyes, but I can't read blue text on the background I have...