Page 1 of 2
losi mip trans lb 1000 2000
Posted: Wed Dec 30, 2015 7:09 pm
by hugger19
well i have a wanted list on the gears for this trans and bought the center gear off ebay for $15. was tring to build this on the cheap, THAN i tried the stock gears out of a rc10 stealth just for the hell of it and well....... guess what they all fit!!! had to use smaller bearings but the gears fit fine. the diff gear not 100% sure yet till i get the mip losi outdrives. also havent tried to see if the stock stealth slipper assembly will work yet. so what do u guys think??
Re: losi mip trans lb 1000 2000
Posted: Thu Dec 31, 2015 12:31 am
by aip47-2008
hugger19 wrote:well i have a wanted list on the gears for this trans and bought the center gear off ebay for $15. was tring to build this on the cheap, THAN i tried the stock gears out of a rc10 stealth just for the hell of it and well....... guess what they all fit!!! had to use smaller bearings but the gears fit fine. the diff gear not 100% sure yet till i get the mip losi outdrives. also havent tried to see if the stock stealth slipper assembly will work yet. so what do u guys think??
DSCN5537.jpg
DSCN5538.jpg
Diff. gears are different!
Re: losi mip trans lb 1000 2000
Posted: Thu Dec 31, 2015 7:42 pm
by hugger19
are they smaller??
Re: losi mip trans lb 1000 2000
Posted: Thu Dec 31, 2015 11:53 pm
by aip47-2008
hugger19 wrote:are they smaller??
I have not counted, but side by side comparison shows a larger bearing in the center and the ratio is 2.3:1 compared to the Stealth @ 2.25:1
http://www.rc10talk.com/viewtopic.php?f=82&t=6712
Re: losi mip trans lb 1000 2000
Posted: Fri Jan 01, 2016 1:26 am
by hugger19
iam going to wait till the out drives get here to see if the diff works. already spent $15 on a gear i have no use for dont wanna do that twice.
Re: losi mip trans lb 1000 2000
Posted: Mon Jan 04, 2016 5:14 am
by Asso_man!
That is the best vintage tranny ever according to me. I had the chance to build a new one and I've never felt such a silky smooth diff on anything else. I don't think you could build it "cheap" and spare parts are quite difficult to find. That trans hasn't been produced in large numbers I believe. I would be interested in the yellow housing should you consider parting with it
Re: losi mip trans lb 1000 2000
Posted: Mon Jan 04, 2016 5:02 pm
by hugger19
that stealth dif gear worked fine no issues
Re: losi mip trans lb 1000 2000
Posted: Mon Jan 04, 2016 7:40 pm
by hugger19
here it is so far just waiting on a spear gear to come in the mail and gear cover.
Re: losi mip trans lb 1000 2000
Posted: Mon Jan 04, 2016 7:57 pm
by Diamond Dave
Oooh that looks nice.
Re: losi mip trans lb 1000 2000
Posted: Mon Jan 04, 2016 8:06 pm
by hugger19
thanks going to be a display piece
Re: losi mip trans lb 1000 2000
Posted: Sat Jan 30, 2016 1:21 pm
by hugger19
all done. so from a empty case i had laying around to a complete trans. used all gears from the stealth only used different bearings they were smaller than the stealth for the gears. the top shaft i had its a losi/associated hydra setup.
Re: losi mip trans lb 1000 2000
Posted: Sat Jan 30, 2016 2:24 pm
by TRX-1-3
I love transmissions. This is a good lookin' tranny.
Mark
Re: losi mip trans lb 1000 2000
Posted: Sat Jan 30, 2016 5:29 pm
by urpaldan
That is very nice! Good work!
Re: losi mip trans lb 1000 2000
Posted: Sat Jan 30, 2016 5:31 pm
by hugger19
thanks
Re: losi mip trans lb 1000 2000
Posted: Sun Jan 31, 2016 12:42 pm
by Grunger73
I really like the look of the out drives . Very nice. First time I've seen one of these.