RC10Talk - The Net's Largest Vintage R/C Community

I have a never ran original worlds that just needs torn down and cleaned up and reassembled. There are few rusty screws that need replaced.

Did you get the wheels and tires and body with it?
I had purchased one that was also a never ran specimen that had been dug out of someone's closet.
Mine however, was missing the rear wheels and tires, the body and the battery strap.
Looks like you will have a nice shelfer when you are done.

Everything was there but the body even decals were there.

Very nice mate..

All torn down and ready for cleanup and reassembly. There are a few rusted screws that will be replaced

Excited to see this.

So got it cleaned up and started the reassembly. I need to pick up a body and electronics. Trying to decide if I should keep the stock turnbuckles or add titanium ones.

Looks great! If you do turnbuckles I would call or email Lunsford, they still sell the classic style sets that are almost identical to what the car would have had back in 94. Make sure they know you want the classic buckles and that you have an original worlds car not the rere. The buckles are shorter in the rear for the OG worlds

Which ones are the classic ones?

Ok she is all cleaned up and a roller again. I will add some titanium turnbuckles shortly and I ordered shock rebuild kits so for now the shocks are mostly dry with just a few drops of oil to keep the orings wet. When it was apart I added bearings to the steering bell cranks. Now the long serch for electronics. Need a nice Mr series motor.

Looks very, very, good!

Jeez.. That was clean to start with.

Going to turn this into a kinwald tribute worlds. Won't be just like his but similar.

Where'd ya get the custom shock towers?

Jeff (GoMachV) made them for me