RC10Talk - The Net's Largest Vintage R/C Community

AE Vehicles Only this month!

OK, this will be the thread for the January 2016 Build of the Month Contest.

Refresh yourself with the rules before entering - http://www.rc10talk.com/viewtopic.php?f=98&t=35923

Please remember, no chit chat until all of the entries are locked in so they can stay grouped together.

GOOD LUCK!!!

************************************************************************

** Place Holders **

If you would like to enter the contest, create a post as a "place holder". DO NOT POST ANY PICS. You have until the 5th of the month to lock in a spot (10 entries max). You will then have 2 days to edit your post and attach the pics of your entry. The poll will be started on the night of the 7th. If you have not submitted your pics by then you will be removed from the contest.

RC10 Graphite (Stealth) http://www.rc10talk.com/viewtopic.php?f=35&t=39355

My RC10T I just finished off with my first but hopefully not the last Andy's body. Most likely will remain on the shelf, I love the way it looks too much to destroy it.

I'll have a go.

Here's my updated WOIN RC10. Originally, this car was built with the nylon Klein arms. They gave a slightly narrower track than a B4. It worked well but I didn't like leaving out the extra width. Also, I used some B4 front suspension parts which I didn't like. Other small mods included a B4 slipper and a FibreLyte (RPM Worlds) front shock tower.

Once Niki had his Quadra-symmetric suspension parts available, I knew I wanted them to get the right track width. Off came the Klein parts and Niki's parts were installed.

B1.5 #2

Build thread - http://www.rc10talk.com/viewtopic.php?f=35&t=10842&start=105

Just your standard well used gold pan with a few extras.

composite craft carbon towers
newer style bottom load shocks
Andy's arms up front, Raborn arms and universals out back
Rogue Jelly beans with new re-re rubber.
Metal plate paint job on scrap body just for fun (outside, but shelf duty)*really the only reason I can enter this month, hah

RC10 DS with a Toyota GT2000 body (replica of a real race car), everything is painted from inside (no decals). Has a 2 speed spur gear.

well i think we all know this car

My original RC10 Worlds Car

Here's the build thread: http://www.rc10talk.com/viewtopic.php?f=35&p=432313#p432313

I will update this with better pix tomorrow

Its not vintage, but it is the first production AE MGT .21 with a few hop-ups and Is what brought me back into the hobby back in 2003.

Andys front arms, RPM rear arms, Fiberglass front and rear towers.

Green springs up front, Red springs in the back. The tub was powder coated white, the body paint has a nice pearl white to match.

This buggy sits just like I bought it.

If Dave is definitely in, we have our 10.

Pics! I've been waiting for this. One of the coolest things about the site. The BOTM Contest!

Feel free to get your pics uploaded. Polling starts on the 8th.

hugger19 and Vale, the poll is going up tonight so get your pics uploaded.