NEW! SEXY DETAIL PARTS for the RC4WD V8 Engine + GIVEAWAY!!
Posted: Thu Apr 07, 2016 5:19 pm
Awwwrighty Then! RC4WD is known for Stupendously *****in' parts, no? They recently issued this stunning V8 engine, and did all the major work- An impressive piece, to be sure. But, everything can be improved on, and at customer request I did up a few lil' sumpin's fer this beastie. It looks sorta real, but when the hood goes up, there's some major pieces that needed addressing to kick it into the 'Wowza!!' category, and here they are for your perusal.
DESCRIPTION
This kit comes right from the REC mill, and the paint detail is what sets it off. Now, you can use any colour you wish on the valve covers, and to make this easy I'm including some things along with one of my secrets to accomplishing this. Some 800 grit paper, and a Tri-Grit sanding stick that makes the fins look Chromed. (Complete instructions included.) The air cleaner has a Styrene 'Paper' insert, as well as Stainless mesh if you wish: Valve Covers are Complete with Finned Breathers. Distributor has wire as well as a mounting bracket, heat-shrink tubing for 'Boots', tiny Wire Looms to neaten up dat engine bay & not make it look like a giant spider is eating your motor, plus a diagram of the Chevy V8 firing order for easy, accurate plumbing. Hell, there's even a coil to mount wherever you like so the center wire has somewhere to go! A LOT of thought, design & machine time goes into these and you will be Very happy with what you get for your Hard-Earned dollar. Note: The logo is spelled with an 'o' so as not to upset Vic Edelbrock's lawyers. If you prefer, I can change the engraving to 'ROGUE' in block letters, just make sure I know that!
A Quick Video, Below, Shows the Engine a Bit More-I apologize in advance!
https://youtu.be/PXGCAaYhqBQ
ORDERING- PLEASE READ!
* As the PP links never worked all that well, All payments are now sent in USD directly to my Paypal address, [email protected] (Copy & paste address to avoid misspellings.) Free shipping in US.
* International orders will be charged a flat $10 -This covers a whole order regardless of how many are shipped- Who loves ya?
2 WAYS TO OWN!
1- Get on the cut list with a non-refundable deposit of $5 (per kit) BY April 18th. I will then send you a 'Balance Due' (to the SAME Paypal address ONLY) the deposit came from, just before they're ready to ship! Easy!
OR:
2- You can also just pay in full up front, just add $10 for Int'ls, to the total. Simple!
PRICES
Price Per Kit is $99.99 (FREE Shipping in US)
Do NOT send as 'Gift', and be SURE I have your shipping address!
Only US Dollars accepted
Ship date is 'Estimated', as I never know how many I'll be making
Notes
We are a specialty manufacturer that does NOT maintain an inventory, and most items are never re-done again. Please submit your deposit/payment by midnight the 14th of March (12 days): I'll already be cutting, so if you're not on the cut list, you'll very likely miss out.
Feel free to Email with any questions or suggestions, I value customer input!
Many Thanks,
Chris Cazan
Rogue Element Components
Paypal/Email address: [email protected]
Deposit Due/Order Cutoff date: April 18th, 2016
Estimated Shipping Date: May 18th, 2016
------------------------------GIVEAWAY----------------------------
Yup! I am not mentally stable, spo I'm gonna Give a Full Kit to some lucky poster, for doin' almost Nuthin'! So post up quick-like before my Thorazine gets here. Winner will be picked on April 16th, the only rule is you gotta check back here & if you win, contact ME within 7 days- Or I'll keep it! Best of Luck to all, Chris REC
DESCRIPTION
This kit comes right from the REC mill, and the paint detail is what sets it off. Now, you can use any colour you wish on the valve covers, and to make this easy I'm including some things along with one of my secrets to accomplishing this. Some 800 grit paper, and a Tri-Grit sanding stick that makes the fins look Chromed. (Complete instructions included.) The air cleaner has a Styrene 'Paper' insert, as well as Stainless mesh if you wish: Valve Covers are Complete with Finned Breathers. Distributor has wire as well as a mounting bracket, heat-shrink tubing for 'Boots', tiny Wire Looms to neaten up dat engine bay & not make it look like a giant spider is eating your motor, plus a diagram of the Chevy V8 firing order for easy, accurate plumbing. Hell, there's even a coil to mount wherever you like so the center wire has somewhere to go! A LOT of thought, design & machine time goes into these and you will be Very happy with what you get for your Hard-Earned dollar. Note: The logo is spelled with an 'o' so as not to upset Vic Edelbrock's lawyers. If you prefer, I can change the engraving to 'ROGUE' in block letters, just make sure I know that!
A Quick Video, Below, Shows the Engine a Bit More-I apologize in advance!
https://youtu.be/PXGCAaYhqBQ
ORDERING- PLEASE READ!
* As the PP links never worked all that well, All payments are now sent in USD directly to my Paypal address, [email protected] (Copy & paste address to avoid misspellings.) Free shipping in US.
* International orders will be charged a flat $10 -This covers a whole order regardless of how many are shipped- Who loves ya?
2 WAYS TO OWN!
1- Get on the cut list with a non-refundable deposit of $5 (per kit) BY April 18th. I will then send you a 'Balance Due' (to the SAME Paypal address ONLY) the deposit came from, just before they're ready to ship! Easy!
OR:
2- You can also just pay in full up front, just add $10 for Int'ls, to the total. Simple!
PRICES
Price Per Kit is $99.99 (FREE Shipping in US)
Do NOT send as 'Gift', and be SURE I have your shipping address!
Only US Dollars accepted
Ship date is 'Estimated', as I never know how many I'll be making
Notes
We are a specialty manufacturer that does NOT maintain an inventory, and most items are never re-done again. Please submit your deposit/payment by midnight the 14th of March (12 days): I'll already be cutting, so if you're not on the cut list, you'll very likely miss out.
Feel free to Email with any questions or suggestions, I value customer input!
Many Thanks,
Chris Cazan
Rogue Element Components
Paypal/Email address: [email protected]
Deposit Due/Order Cutoff date: April 18th, 2016
Estimated Shipping Date: May 18th, 2016
------------------------------GIVEAWAY----------------------------
Yup! I am not mentally stable, spo I'm gonna Give a Full Kit to some lucky poster, for doin' almost Nuthin'! So post up quick-like before my Thorazine gets here. Winner will be picked on April 16th, the only rule is you gotta check back here & if you win, contact ME within 7 days- Or I'll keep it! Best of Luck to all, Chris REC
That is SWEET
Amazing work, you're my edol.
, can not afford to pass on this kit 
!!!!!!
