Page 1 of 1

Tough steering servo?

Posted: Wed Apr 20, 2016 2:29 pm
by Superev1l
The losi 22t 2.0 is so advanced that it doesnt have any type of servo saver and i have gone through all my old plastic gear spares. Can you guys recommend a tough metal gear servo? I dont necessarily need a powerful servo,just a tough one. I had a metal gear 9k servo from redcat that seemed like it would work,but i traded it away. Im trying to stay under 50$

Re: Tough steering servo?

Posted: Wed Apr 20, 2016 4:24 pm
by jwscab
I think you can find a decent savox servo with metal gears, I always hear good things about them.

Re: Tough steering servo?

Posted: Wed Apr 20, 2016 5:56 pm
by Superev1l
Checked them out they do have a few under 50$ in the 200+gr range

Re: Tough steering servo?

Posted: Wed Apr 20, 2016 6:22 pm
by alien3t
I race my B5M with a Turnigy servo. I know JK racing uses one in his cars, usually under $40, sometimes decent under $30.

http://www.hobbyking.com/hobbyking/store/__52736__TrackStar_TS_D99X_Digital_1_10_Scale_Touring_Drift_Buggy_Steering_Servo_10kg_0_08sec_45g.html

10kg should be about 352 OZ

http://www.amainhobbies.com/rc-cars-trucks/savox-sc1258tg-standard-digital-high-speed-titanium-gear-servo-sav-sc-1258tg/p183316
I race with this one in my T5M been flawless, very quick, very happy. (can find them used for a little better, I am the 3rd owner at least on mine.

Re: Tough steering servo?

Posted: Wed Apr 20, 2016 7:31 pm
by Kyoshojoe
I can attest to savox toughness. Run one in my colossus monster truck and it's a powerhouse. With an amain discount was under 70$

Re: Tough steering servo?

Posted: Thu Apr 21, 2016 8:25 am
by matt1ptkn
For a cheap metal gear servo, I've always had good luck with Hitec. I actually use the Hitec HS-645MG in a couple XXX-Ts with the servo saver locked out. Tower has a descent selection of metal gear Hitecs in the price range you are looking.

http://www3.towerhobbies.com/cgi-bin/wti0095p?FVSEARCH=hitec+servo

Re: Tough steering servo?

Posted: Thu Apr 21, 2016 8:36 am
by RC10th
The JR Z590 isn't a bad servo, only $39.99 and 85oz. @ 6v.

Re: Tough steering servo?

Posted: Sat Apr 23, 2016 1:56 pm
by thepistol
My brother has a 22 2.0 buggy with a Savox SC-1251MG servo, and he's blown 2 sets of gears in it, yet I've had one in my RB5 for 3+ years without any problems. Still, the Savox's are great servo's. Personally, I've had really good luck with the Solar D770 servo's from Hobbypartz.com Have 5 of these in various buggies (B3,B4,RB5,B-Max2 & a Cougar SV) and haven't had any problems at all. And for under $20 each they are unbeatable.

Re: Tough steering servo?

Posted: Wed May 25, 2016 1:24 pm
by yellowdatsun
I also recommend the Hitec 645MG series. The 5645MG is good too, I think the 5 denotes digital. The 645 is affordable too at around $35.

The Savos 1257TG is good too, and has titanium gears. These are about twice the price of the Hitec.

The Associated "metal gear" servos have a plastic big gear, so they really aren't metal gear servos.