Page 1 of 1

Jrx2 modern wheel adaption

Posted: Mon Jun 06, 2016 11:36 pm
by scoobyrs25
Any straight forward solution to running modern 12mm hexes on my Jrx2? I figured I'd just upgrade the front of the car with RB6 front axles/spindles. I was hoping there was an available hex for the rear.
Thanks,
Kevin

Re: Jrx2 modern wheel adaption

Posted: Tue Jun 07, 2016 1:17 am
by clm
Modern wheels... If I remember correctly the easiest way is to use b4 wheels with a spacer on the stock axle on front.

Re: Jrx2 modern wheel adaption

Posted: Tue Jun 07, 2016 7:53 am
by RCveteran
B4 wheels direct fit front but rear requires small .125" spacer usually to avoid rubbing or custom works spacer. Im sure you could drill any standard hex to fit rear axle and pin and experiment with wheel offset from there. There are other ideas with regard to changing axles, Google jrx2 modern wheel.

Re: Jrx2 modern wheel adaption

Posted: Tue Mar 07, 2017 9:20 am
by LosiXXkid
There's always this option to run standard XX or XXX wheels....

http://www.rc10talk.com/viewtopic.php?f=27&t=36070&start=15