RC10Talk - The Net's Largest Vintage R/C Community

After talking with my brother about our old RC cars and the fact that I have been working on an old RC10 that I purchased, he located an old Plano tackle box full of parts.
After opening this box I located some old Yokomo 834 parts. Anyways, I have got the bug to take the parts and build a complete car.
Can anyone here direct me to a good website where I could purchase some needed parts. I have been looking on Ebay, but there is not too much listed on that site. Thanks.....

Wow, you're kinda missing a lot but it looks like a fun project.

GomachV - Gospeed, can do the chassis.
http://www.rc10talk.com/viewforum.php?f=100

check out pargustore....

pargustore.com

Sometimes you can find stuff at Antonia'a store:

http://stores.ebay.com/Antonias-RC-Buggy-Parts-of-the-80th?_dmd=2&_nkw=4933

Thanks for all the good info guys, I really appreciate it.
I'll post photos with updates when I get some new/used stuff in.

you have an ambitious project there, stick around ask questions, get into the B/S/T section and you will have some more openings to finding some of the harder to find pieces. Other than that, these guys have set you on the best path to finding parts.

check ebay early and often as well.

I would first start with a manual if you can track it down, I believe I have seen one on this forum, so you can match part numbers to missing parts. Of course, you can sub in stuff as well, like shocks and such.

Custom works dominator used some 834b parts so there is another avenue to explore.

jwscab wrote:you have an ambitious project there, stick around ask questions, get into the B/S/T section and you will have some more openings to finding some of the harder to find pieces. Other than that, these guys have set you on the best path to finding parts.

check ebay early and often as well.

I would first start with a manual if you can track it down, I believe I have seen one on this forum, so you can match part numbers to missing parts. Of course, you can sub in stuff as well, like shocks and such.

Custom works dominator used some 834b parts so there is another avenue to explore.

Thanks for the info, I do check Ebay on a regular basis.
I did just pick up a brand new Hot Trick roll bar and I am waiting on an repo oem chassis.

Nice box. good way to keep the parts safe.

Here is a little update on the 834b. I have this chassis on the way to Maryland, Thanks to GoMachV.
I'm am very impressed by the looks of this chassis.

Not much to update here. I have been cleaning parts from the front end of the 834b.

Any ideas on the best way to clean bearings? Just a good wipe down do or should I soak then in anything?

Here are some of the parts that I have acquired.....

one way can be a rpm bearing cleaner. holds it in a housing, spey a rc cleaner into the tip. like perfomrance plus. Then add some bearing oil and spin to lubricate. One i do it.

The gearbox and belt guide are amongst the rarest parts! You are pretty much there.