RC10Talk - The Net's Largest Vintage R/C Community

What are the extended and compressed lengths of the short RC10 front shocks? I'm using a McAllister lowering kit that uses 4 short shocks and I'd prefer the ones with threaded bodies - not necessarily Associated shocks.

the lowering kit is designed to work with the .56" rc10 front shocks on all 4 corners with .56 shafts. so you need threaded .56 shocks. should be available from usage on tc3, I think.

https://www.rcplanet.com/Associated_Anodized_Threaded_Shock_Body_Clear_p/asc3963.htm

Hi,

I bought these for my on-road Ten4 project,

like jwscab said,

1 set of these,

http://www3.towerhobbies.com/cgi-bin/wti0001p?&I=LXSG46&P=7

2 sets of these,

http://www3.towerhobbies.com/cgi-bin/wti0001p?&I=LXPA11&P=7

If I recall, somewhere around 2" - 2 3/4" .