RC10Talk - The Net's Largest Vintage R/C Community

Every year me and a friend of mine have a challenge, where we bring custom or modify cars to race them. Last year we did outrunner power fwd car. This year we went with rwd car, the rules are basically any chassis aslong as its rwd and any stock 21.5t and no blinky esc.
So of course following my traditional bring something unique style i went with a frd chassis. Still have some parts coming but here is the current state of it with mock up parts.

Thought you guys may find the build interesting.

.

Finally the rest of my parts arrive minus the electronics.

Cool.

I had to look twice before I realised it was front engine rear drive.

Today was adjustment day spent a good 6 plus hour adjusting all the stuff. Especially the clearance between the drive shaft to the battery and the drive shaft to the top deck. Also my plan for wide 26mm tires at the rear and skinny 20mm at the front had to be change the front 20mm rim was rubing on the arms, so i switch to 26mm all around until i find a 20mm rim that works.