B1M mid motor RC10
-
Northeee
- Approved Member
- Posts: 40
- Joined: Sun Jul 30, 2017 6:57 pm
- Location: U.K.
Re: B1M mid motor RC10
All done and very happy with how it all went together . No problems .thanks Brian
- Attachments
-
-
mk-Zero
- Business Member
- Posts: 1678
- Joined: Fri Jan 03, 2014 7:14 pm
- Location: Orange, CA
- Has thanked: 4 times
- Been thanked: 19 times
Re: B1M mid motor RC10
Looks great!
You probably won't need the front wing, the B1M has tons of front bite. On the back, start with 3 deg of toe per side to help with rear traction.
You probably won't need the front wing, the B1M has tons of front bite. On the back, start with 3 deg of toe per side to help with rear traction.
-
Northeee
- Approved Member
- Posts: 40
- Joined: Sun Jul 30, 2017 6:57 pm
- Location: U.K.
Re: B1M mid motor RC10
Yes I have the 3 deg rear toe . Front wing just there really to save my front tower as and when needed 
will cut it down a bit more . 1st run last Sunday at the Schumacher indoor . They run a vintage class which is full of re release cat xls an yz10 so 4wd so am ok with my mods to keep up for now .1st run practice felt very good great turn in . Turns in so much better and change of direction very Predictable so easy to place the car just we’re you want it .only real change all day was to go short wheel base on the rear blocks as it was pushing just a bit on the fast right on the end of the straight. This help get a tighter line round . Surface is cork mat and the race line is about 1M wide of that it’s like ice . Anyway 1st outing got the car on Pole for the vintage Final. But made a mistake or 3 ended 4th . But a very good 1st outing!
will cut it down a bit more . 1st run last Sunday at the Schumacher indoor . They run a vintage class which is full of re release cat xls an yz10 so 4wd so am ok with my mods to keep up for now .1st run practice felt very good great turn in . Turns in so much better and change of direction very Predictable so easy to place the car just we’re you want it .only real change all day was to go short wheel base on the rear blocks as it was pushing just a bit on the fast right on the end of the straight. This help get a tighter line round . Surface is cork mat and the race line is about 1M wide of that it’s like ice . Anyway 1st outing got the car on Pole for the vintage Final. But made a mistake or 3 ended 4th . But a very good 1st outing!- Attachments
-
-
mk-Zero
- Business Member
- Posts: 1678
- Joined: Fri Jan 03, 2014 7:14 pm
- Location: Orange, CA
- Has thanked: 4 times
- Been thanked: 19 times
Re: B1M mid motor RC10
Awesome, glad you like it so far!
I haven't done much tuning on mine and it already drives great, but I'm sure there's more in it.
I haven't done much tuning on mine and it already drives great, but I'm sure there's more in it.
-
Northeee
- Approved Member
- Posts: 40
- Joined: Sun Jul 30, 2017 6:57 pm
- Location: U.K.
-
Northeee
- Approved Member
- Posts: 40
- Joined: Sun Jul 30, 2017 6:57 pm
- Location: U.K.
-
Northeee
- Approved Member
- Posts: 40
- Joined: Sun Jul 30, 2017 6:57 pm
- Location: U.K.
-
Lonestar
- Approved Member
- Posts: 4270
- Joined: Wed Dec 12, 2007 10:17 am
- Location: Switzerland, yannow, in Europe (or almost)
- Has thanked: 626 times
- Been thanked: 167 times
Re: B1M mid motor RC10
AE RC10 - Made In The Eighties, Loved By The Ladies.
Blue Was Better - now, Blue Is Bankrupt.
Facebook affiliate program manager: "They go out and find the morons for me".
Life is short. Waste it wisely.
Blue Was Better - now, Blue Is Bankrupt.
Facebook affiliate program manager: "They go out and find the morons for me".
Life is short. Waste it wisely.
-
Lonestar
- Approved Member
- Posts: 4270
- Joined: Wed Dec 12, 2007 10:17 am
- Location: Switzerland, yannow, in Europe (or almost)
- Has thanked: 626 times
- Been thanked: 167 times
Re: B1M mid motor RC10
How have you fixed the bulkhead to the chassis? Just two screws, and the (soft) brace to the transmission?!?
I've wanted to put the shocks at the back on mine too... if only so I can grap the slipper nut with a proper tool instead of pliers!
AE RC10 - Made In The Eighties, Loved By The Ladies.
Blue Was Better - now, Blue Is Bankrupt.
Facebook affiliate program manager: "They go out and find the morons for me".
Life is short. Waste it wisely.
Blue Was Better - now, Blue Is Bankrupt.
Facebook affiliate program manager: "They go out and find the morons for me".
Life is short. Waste it wisely.
-
tOnio
- Regular Member
- Posts: 8
- Joined: Wed Jan 31, 2018 5:46 am
- Location: Reims - France
Re: B1M mid motor RC10
Excellent job !!!!
Even if for me, an RC10 is with a rear motor.
Do have you already tested?
Even if for me, an RC10 is with a rear motor.
Do have you already tested?
-
Northeee
- Approved Member
- Posts: 40
- Joined: Sun Jul 30, 2017 6:57 pm
- Location: U.K.
Re: B1M mid motor RC10
- Re drilled the chassis into the bottom of the bulkhead as well as the top brace
-
Northeee
- Approved Member
- Posts: 40
- Joined: Sun Jul 30, 2017 6:57 pm
- Location: U.K.
Re: B1M mid motor RC10
- Top top brace comes off the bulkhead The is bolted to the plate that’s bolted to the top of the gearbox , had to add shims to get the level . All made with 3mm grp glass fibre sheet
-
Northeee
- Approved Member
- Posts: 40
- Joined: Sun Jul 30, 2017 6:57 pm
- Location: U.K.
-
Northeee
- Approved Member
- Posts: 40
- Joined: Sun Jul 30, 2017 6:57 pm
- Location: U.K.
Re: B1M mid motor RC10
1st outing this Sunday at the Schumacher indoor . Will report back how it went.
-
- Similar Topics
- Replies
- Views
- Last post
-
- 106 Replies
- 9681 Views
-
Last post by DaveM
-
- 173 Replies
- 26198 Views
-
Last post by isaacn
-
- 15 Replies
- 2205 Views
-
Last post by mk-Zero
-
- 22 Replies
- 7074 Views
-
Last post by GoMachV
-
- 2 Replies
- 2408 Views
-
Last post by mk-Zero
-
- 5 Replies
- 1601 Views
-
Last post by knucklebuster
-
- 2 Replies
- 1310 Views
-
Last post by integra22t
-
- 40 Replies
- 4795 Views
-
Last post by BloodClod
Who is online
Users browsing this forum: 
CommonCrawl [Bot], Facebook [Bot] and 3 guests