RC10Talk - The Net's Largest Vintage R/C Community

http://www3.towerhobbies.com/cgi-bin/wti0001p?&I=LXGAF4&P=SM

Is this the same arm that comes with the RPM '91 worlds kit? (color aside)

If not does anybody know the pivot hole to pivot hole measurement on the worlds arms?

bngiles wrote:http://www3.towerhobbies.com/cgi-bin/wti0001p?&I=LXGAF4&P=SM

Is this the same arm that comes with the RPM '91 worlds kit? (color aside)

If not does anybody know the pivot hole to pivot hole measurement on the worlds arms?

That's not the W91 arm, it's a stock replacement for the ASC6206. scr8p made a post a while ago with measurements on the various RPM arms.

Ya those are the "Team Car" arms you see sometimes. They rereleased those a few years ago in response to a lot of dirt oval guys asking for them.

3rd page:

http://www.rc10talk.com/viewtopic.php?f=1&t=2801&st=0&sk=t&sd=a&hilit=rpm+arms&start=30

Thanks!

There was a recent post with some dirt oval company making delrin arms for the RC10. Are those a substitute for the W91, or the Asso wide track fromt arms?

I have a set of RPM wide fromt arms for JRX2 that I need to check the hole distance, but it looks like it would be really close to the W91 length. The JRX2 arms also fit the RC10T front bulkhead and carriers.




I feel a new project coming on.

Crap.

That was one of Scr8p posts, I couldn't find and don't remember the name, but I did get some arms (that are now burried in a box).

bngiles wrote:Thanks!

There was a recent post with some dirt oval company making delrin arms for the RC10. Are those a substitute for the W91, or the Asso wide track fromt arms?

I have a set of RPM wide fromt arms for JRX2 that I need to check the hole distance, but it looks like it would be really close to the W91 length. The JRX2 arms also fit the RC10T front bulkhead and carriers




I feel a new project coming on.

Crap.

here it is
http://www.rc10talk.com/viewtopic.php?f=1&t=3266&p=30130&hilit=delrin#p30130

mrlexan wrote:That was one of Scr8p posts, I couldn't find and don't remember the name, but I did get some arms (that are now burried in a box).

lol, me too.

dynotech makes them along with alot of other top notch stuff. you guys should see the new sprint car they make chad smith is a wiz with a cnc mill. here check it out: http://www.dirtoval.com/forums/showthread.php?t=26454

Dynotech, cookie for bill.